Part 1 — General
1.1 Section Includes
A.Small ditch and surface ditch construction.
1.2 Related Sections
A.Section 02056: Embankment, Borrow, and Backfill
1.3 REFERENCES Not Used
1.4 Definitions
A.Small ditch – Ditch or channel, not V-shaped, with a bottom width less than 12.0 ft.
B.Surface ditch – V-shaped, 1.0 ft deep minimum and 3.0 ft wide across the top, or as shown.
1.5 SUBMITTALS Not Used
Part 2 — PRODUCTS Not Used
Part 3 — Execution
3.1 Small Ditch
A.Construct the ditch as shown.
B.Place and compact excavated material in embankments. Refer to Section 02056.
3.2 Surface Ditch
A.Construct the ditch along the contour of the ground.
B.Place excavated material to form a berm on the downhill side of the ditch.
C.Shape the ditch and berm so that power-driven mowers can operate on the graded surface.
Get an email when 02318 changes
Utah revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Utah Standard Specifications for Road and Bridge Construction, 2027 Edition. Pages 285–286 of 1,343. View official source ↗