Part 1 — General
1.1 Section Includes
A.Materials and procedures for constructing gate and frame for hand slide gates or for screw gates and frames according to the DB Series Standard Drawings.
1.2 RELATED SECTIONS Not Used
1.3 References
A.AASHTO M 111: Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
B.ASTM A 36: Carbon Structural Steel
C.ASTM A 307: Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
D.ASTM A 575: Steel Bars, Carbon, Merchant Quality, M-Grades
E.ASTM D 2000: Rubber Products in Automotive Applications
1.4 DEFINITIONS Not Used
1.5 Submittals
A.Shop drawings for review. Include at least the following:
1.Diversion box screw gate and frame
2.Installation procedures
3.Fabrication methods
Part 2 — Products
2.1 Blades and Metal Frames for Hand-Slide Gates
A.Zinc coated steel. Refer to and comply with AASHTO M 111.
2.2 Frame and Flush Bottom Closure
A.Carbon steel for frame and flush bottom according to ASTM A 36.
B.Galvanizing frame and flush bottom according to AASHTO M 111.
C.Galvanized fastener according to ASTM A 307.
D.Threaded carbon steel according to ASTM A 575.
E.Rubber seal for flush bottom according to ASTM D 2000, Grade AA 625 or BC 610 to 615.
Part 3 — Execution
3.1 Installation
A.Hand-Slide Gate – Install according to the DB Series Standard Drawings.
B.Install the screw gate and frame according to the authorized shop drawings so the gate opens and closes smoothly.
Get an email when 02611 changes
Utah revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Utah Standard Specifications for Road and Bridge Construction, 2027 Edition. Pages 381–382 of 1,343. View official source ↗