B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Site Construction & Earthwork (02000-02999)

02635Grates, Covers, Frames, Trash Racks, And

UT · 2027 Standard Specifications✓ Full text on BuildSpecRev. November 18, 2021Book pages 409–410 Save this section

Ask about Section 02635

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

MANHOLE STEPS

Part 1 — General

1.1 Section Includes

A.Grates, covers, frames, trash racks and manhole steps.

1.2 RELATED SECTIONS Not Used

1.3 References

A.AASHTO M 31: Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
B.AASHTO M 111: Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
C.AASHTO M 199: Precast Reinforced Concrete Manhole Sections
D.AASHTO M 270: Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
E.AASHTO M 306: Drainage, Sewer, Utility, and Related Castings
F.ASTM A 536: Standard Specification for Ductile Iron Castings
G.ASTM D 4101: Polypropylene Injection and Extrusion
H.AWS D1.1: Structural Welding Code - Steel

1.4 DEFINITIONS Not Used

1.5 Submittals

A.Shop drawings for cast iron alternative to steel grates and frames, for review.
B.Manhole step manufacturer’s product data sheets and installation instructions for information. Grates, Covers, Frames, Trash Racks, and Manhole Steps

Part 2 — Products

2.1 Grates, Covers, Frames, and Trash Racks

A.Refer to the DB and GF Series Standard Drawings.
1.Structural Steel
a.AASHTO M 270, Grade 36.
b.Fabricate according to AWS D1.1
c.Hot-dip galvanize after fabrication according to AASHTO M 111.
2.Gray Iron.
a.AASHTO M 306, Class 35B.
3.Ductile Iron.
a.ASTM A 536 Grade 80-55-06.

2.2 Manhole Steps

A.Refer to AASHTO M 199 and GF Standard Series Drawings.
1.Steel Rod
a.AASHTO M31, Grade 60.
2.Copolymer Polypropylene Plastic
a.ASTM D 4101.

Part 3 — Execution

3.1 Installation

A.Provide a firm and even bearing surface on the frame so that the grate or cover will not rock under the influence of loading.
B.Install according to manufacturer’s instructions. Grates, Covers, Frames, Trash Racks, and Manhole Steps

Get an email when 02635 changes

Utah revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Utah Standard Specifications for Road and Bridge Construction, 2027 Edition. Pages 409–410 of 1,343. View official source ↗

Ask about this section

Scoped to Utah 2027 Standard Specifications, Section 02635 — Grates, Covers, Frames, Trash Racks, And. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.