MUTCD M2-1P: Junction Auxiliary Plaque
The M2-1P sign is covered in Section 2D.13 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Standard · Required (shall)The Junction (M2-1P) auxiliary plaque (see Figure 2D-5 ) shall display the abbreviated legend JCT and shall be mounted at the top of an assembly (see Section 2D.30) directly above the route sign, the sign for an alternative route (see Section 2D.17) that is part of the route designation, or the Cardinal Direction auxiliary plaque where access is available only to one direction of the intersected route. The minimum…
Where to read the rest
- Full text: MUTCD Section 2D.13: Junction Auxiliary Plaque
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2D.05
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.