MUTCD M5-5P: Lane Designation Auxiliary Plaques
The M5-5P sign is covered in Section 2D.27 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Option · Permitted (may)A Lane Designation (M5-4P , M5-5P , or M5-6P) auxiliary plaque (see Figure 2D-6 ) may be mounted directly below the route sign in an Advance Route Turn assembly on multi-lane roadways to allow road users to move into the appropriate lane prior to reaching the intersection or interchange.
- Standard · Required (shall)If used, the Lane Designation auxiliary plaques shall be used only where the designated lane is a mandatory movement lane and shall be located adjacent to the full-width portion of the mandatory movement lane. The Lane Designation auxiliary plaques shall not be installed adjacent to a through lane in advance of a lane that is being added or along the taper for a lane that is being added.
Where to read the rest
- Full text: MUTCD Section 2D.27: Lane Designation Auxiliary Plaques
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2D.05
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Related signs in Section 2D.27
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.