MUTCD W16-6P: Supplemental Arrow Plaques
The W16-6P sign is covered in Section 2C.62 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Guidance · Recommended (should)If the condition indicated by a warning sign is located on an intersecting road and the distance between the intersection and condition is not sufficient to provide adequate advance placement of the warning sign, a Supplemental Arrow (W16-5P or W16-6P) plaque (see Figure 2C-16 ) should be used below the warning sign.
- Standard · Required (shall)Supplemental Arrow plaques shall have the same legend design as the Advance Turn Arrow and Directional Arrow auxiliary signs (see Sections 2D.26 and 2D.28) except that they shall have a black legend and border on a yellow or fluorescent yellow-green background, as appropriate.
Where to read the rest
- Full text: MUTCD Section 2C.62: Supplemental Arrow Plaques
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2C.03
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Related signs in Section 2C.62
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.