B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Code LibraryDiagramsAssembliesProductsCalculatorsChecklistsCSI MasterFormat SpecificationsPermitsAddress ReportDOT SpecsModel CodesTransportationRailroadFire SafetyAccessibilityStructuralTransit SpecsUSACE
Other Jurisdictions
Transportation
MUTCDFHWA FP-14
Accessibility
ADA StandardsPROWAG
PricingLog in

UtahSt. George

Retaining wall permit checklist — St. George, Utah

Assembled from St. George’s own published permit rules. Every line below is quoted from a city document and linked to it. Nothing here is generated, estimated, or inferred from another jurisdiction.

Do you need a permit?

St. George requires a permit for a retaining wall.

When a permit is not required

Rockery, segmental block, reinforced concrete, or CMU retaining walls under four feet in height do not require a permit under this section, and no permit is required where the wall is already shown in detail on an approved site development plan. Any retaining wall in a front setback requires a permit regardless of height unless detailed on approved site development plans.

Loading the full checklist…

Sources

Other permits St. George publishes rules for

Listed because the city publishes a separate rule for each type — not because this project necessarily triggers one. Whether it does depends on your scope of work.

All St. George permit requirementsSt. George permit costsApply with the city ↗

BuildSpec is a reference, not the authority having jurisdiction. Confirm requirements with St. George before you build.

Retaining wall permit checklist — St. George, Utah | BuildSpec