Working Drawings
Defined in the standard specifications of 6 state transportation agencies. Each definition below is the agency’s own text, with the section it comes from — they do not all say the same thing, and on a contract the difference is the point.
Definitions are quoted from state-authored public specification books. This page carries no I-Code-derived terms.
Drawings and data not in the contract that the contractor is required to submit to the engineer showing how the contractor will perform specific work such as building cofferdams or falsework. 101.4 Units of Measure. Unless noted below, the engineer will make all measurements and determine all final item quantities to places after the decimal point. Abbreviation Description Measure ACRE acre Two-dimensional area method on the surface to the nearest 0.1 acre.
Section 101 — GENERAL INFORMATION, DEFINITIONS, AND TERMS →Stress sheets, shop drawings, erection plans, false work plans, framework plans, cofferdam plans, bending diagrams for reinforcing steel, or any other supplementary plans or similar data which the Contractor is required to submit to the Engineer for approval.
Section 1101 — Definitions →Supplemental design sheets or similar data that the
Section 101 — Terms, Format, and Definitions →Stress sheets, shop drawings, erection plans, falsework plans, framework plans, cofferdam plans, bending diagrams for reinforcing steel or any other supplementary plans or similar data which the contractor will be required to submit to the engineer for approval.
Section 101 — Definition of Terms →Contractor -furnished documents including, but not necessarily limited to: 1. Stress sheets; 2. Shop drawings; 3. Bending diagrams for reinforcing steel; 4. Plans for erection, false Work, frames Work, cofferdams, and other items; and 5. Such other similar data required for the successful completi on of the Work. Section 102: Bidding Requirements and Conditions Page 20
Section 101 — Abbreviations, Symbols, T erms, and Definitions →Stress sheets, shop drawings, erection plans, falsework plans, framework plans, cofferdam plans, bending diagrams for reinforcing steel, or any other suppl ementary plans or similar data that the Contractor is required to submit to the Engineer for approval.
Section 101 — DEFINITIONS AND TERMS →