B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Moreno Valley, California Building Permit Cost Calculator

Estimates permit cost in Moreno Valley from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○One/two family dwelling 0-999 sq ft, per project base at 1,000 sq ft - plan check
Flat fee $1,385.00
$1,385.00
○One/two family dwelling 0-999 sq ft, per project base at 1,000 sq ft - inspection
Flat fee $2,310.00
$2,310.00
One/two family dwelling 2,500-3,999 sq ft, base at 2,500 sq ft - plan check / inspection
$2,000.00 / $2,770.00
see rule
○Permit issuance
Flat fee $30.00
$30.00
○Minimum hourly rate
Flat fee $154.00
$154.00
○Technology maintenance fee / AB 717 training surcharge
Flat fee $3.00
$3.00
How this jurisdiction calculates the fee

Moreno Valley charges a separate plan check fee and inspection fee for each item of work, drawn off flat per-project tables banded by square footage rather than by valuation. New one- and two-family dwellings (including ADUs, model homes and custom homes, construction types IIIB, VA, VB) are priced on a 'per project base' at each size threshold with per-square-foot modifiers for area above the base, and residential remodels and additions use the same base-plus-per-square-foot structure. Every permit also carries a permit issuance fee, a technology maintenance fee, an AB 717 training surcharge and a document archive fee equal to 10% of the plan check fee. Work not otherwise listed is billed at the minimum hourly rate; deferred submittals and after-hours or emergency call-outs carry 2-hour minimums. Schedule of City Fees, Charges and Rates, Fiscal Year 2026-27, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Deck, ground floor - plan check / inspection
$153.00 / $229.00
see rule
Deck, city standard, second story and above - plan check / inspection
$42.00 / $305.00
see rule
Deck, second story and above (custom) - plan check / inspection
$229.00 / $305.00
see rule
Patio cover non-enclosed, city standard, up to 300 sq ft - plan check / inspection
$41.00 / $230.00
see rule
Patio cover enclosed, non-city standard, up to 300 sq ft - plan check / inspection
$230.00 / $385.00
see rule
How this jurisdiction calculates the fee

Decks are a named miscellaneous permit with a flat plan check fee and a flat inspection fee, priced by location rather than size - ground floor, second story and above built to the city standard detail, or a custom second-story-and-above deck. Building to the city standard cuts the plan check from $229 to $42. Add the $30.00 permit issuance fee, $3.00 technology maintenance fee, $3.00 AB 717 training surcharge and the 10%-of-plan-check document archive fee. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

New service or additional panel, 600 volts or less, not over 200 amperes - plan check / inspection
$74.00 / $155.00
see rule
New service or additional panel, 600 volts or less, over 200 amperes - plan check / inspection
$74.00 / $230.00
see rule
New service, 600 volts or over 1,000 amperes - plan check / inspection
$74.00 / $459.00
see rule
Residential photovoltaic, SolarAPP+ application - plan check / inspection
$0.00 / $385.00
see rule
Residential photovoltaic, no fire review, 10 kW or less - plan check / inspection
$88.00 / $314.00
see rule
How this jurisdiction calculates the fee

Electrical work is priced per item off the Building & Safety electrical tables, with each item classified 'simple' or 'complex' and carrying its own plan check fee and inspection fee. New services and additional panels are banded by voltage and amperage; receptacle, switch and lighting outlets, fixed residential appliances and temporary construction power are separate line items. Residential photovoltaic is priced per system, with SolarAPP+ applications drawing no plan check fee at all and only an inspection charge. Add the $30.00 permit issuance fee, $3.00 technology maintenance fee, $3.00 AB 717 training surcharge and the 10%-of-plan-check archive fee. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Freestanding wall (wood frame) over 5'9", up to 100 linear feet - plan check / inspection
$458.00 / $119.00
see rule
○Freestanding wall (wood frame) over 5'9", each additional 100 linear feet - inspection
Flat fee $42.00
$42.00
Freestanding masonry garden wall (city standard) over 3 ft, up to 100 linear feet - plan check / inspection
$42.00 / $305.00
see rule
○Minimum hourly rate (work not otherwise listed)
Flat fee $154.00
$154.00
How this jurisdiction calculates the fee

The Building & Safety section of the fee schedule has no line item literally named 'fence' - the $153.00 fence line in the schedule belongs to Public Works Land Development encroachment inspections, not building permits, so do not use it for a yard fence. A permitted wood-frame fence is charged under the freestanding wall (wood frame) over 5 ft 9 in. category, priced per 100 linear feet; masonry and concrete walls have their own categories. Add the $30.00 permit issuance fee, $3.00 technology maintenance fee, $3.00 AB 717 training surcharge and the 10%-of-plan-check archive fee; anything not listed falls to the $154.00 minimum hourly rate. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Re-roof, no sheathing - plan check / inspection
$41.00 / $155.00
see rule
Re-roof with sheathing - plan check / inspection
$41.00 / $230.00
see rule
Roof structure replacement (residential) up to 1,500 sq ft - plan check / inspection
$459.00 / $385.00
see rule
○Permit issuance
Flat fee $30.00
$30.00
How this jurisdiction calculates the fee

Reroofs are flat-fee per permit, with a small plan check fee plus an inspection fee, and the price turns on whether sheathing is being replaced. Full roof structure replacement is a much higher separate category banded by area. Add the $30.00 permit issuance fee, the $3.00 technology maintenance fee, the $3.00 AB 717 training surcharge and the document archive fee of 10% of the plan check fee. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Retaining wall (city standard design), first 50 linear feet - plan check / inspection
$42.00 / $381.00
see rule
○Retaining wall (city standard design), each additional 50 linear feet - inspection
Flat fee $77.00
$77.00
Retaining wall/foundation repair and replacement, first 50 linear feet - plan check / inspection
$153.00 / $381.00
see rule
Combination wall, first 50 linear feet - plan check / inspection
$153.00 / $466.00
see rule
Freestanding wall (masonry or concrete) over 3 ft, up to 100 linear feet - plan check / inspection
$153.00 / $305.00
see rule
How this jurisdiction calculates the fee

Retaining walls are flat-fee per linear foot band, with a separate plan check fee and inspection fee. Building to the city standard retaining wall detail drops the plan check fee from $153 to $42; repair or replacement of an existing wall or foundation is its own category at the higher plan check rate. A combination retaining/garden wall is charged under the combination wall lines. Add the $30.00 permit issuance fee, $3.00 technology maintenance fee, $3.00 AB 717 training surcharge, and a document archive fee of 10% of the plan check fee. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

Accessory and utility uses (U occupancy), 500 sq ft or less - plan check / inspection
$616.00 / $924.00
see rule
Accessory and utility uses (U occupancy), 501 sq ft or more - plan check / inspection
$924.00 / $924.00
see rule
Carport - plan check / inspection
$462.00 / $385.00
see rule
○Permit issuance
Flat fee $30.00
$30.00
How this jurisdiction calculates the fee

Once a shed exceeds the 120 sq ft exemption it is charged as an accessory and utility use (U occupancy) with a flat plan check fee and a flat inspection fee in two size bands - the inspection fee is the same in both bands and only the plan check rises. Add the $30.00 permit issuance fee, $3.00 technology maintenance fee, $3.00 AB 717 training surcharge and a document archive fee of 10% of the plan check fee. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 11/5/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Water heater permit (traditional storage tank, gas or electric)
Flat fee $60.00
$60.00
○Water heater replacement
Flat fee $60.00
$60.00
○Water heater permit re-inspection
Flat fee $60.00
$60.00
○Permit issuance
Flat fee $30.00
$30.00
○Technology maintenance fee / AB 717 training surcharge
Flat fee $3.00
$3.00
How this jurisdiction calculates the fee

A storage-tank water heater is a single flat permit fee with no plan check component and no per-fixture math, and the city sets the same flat amount for a new permit, a replacement, and a re-inspection. Tankless and heat pump units fall out of this line and are priced under the regular plumbing/mechanical/electrical item tables. Add the $30.00 permit issuance fee, the $3.00 technology maintenance fee and the $3.00 AB 717 training surcharge. FY 2026-27 schedule, revised 6-30-26.

Source: published fee schedule · Verified 9/15/2026

See the full write-up: Moreno Valley building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.