B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Riverside, California Building Permit Cost Calculator

Estimates permit cost in Riverside from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○(R3) New SFD, 700 SF min & 7,000 SF max - charged as plan check fee and again as permit fee
Flat fee $0.57
$0.57
○(R1, R2) Multi-Family Dwelling, 3,000 SF min & 50,000 SF max - each
Flat fee $0.30
$0.30
○(R3) Home Remodel SFD, 100 SF min & 500 SF max - each
Flat fee $0.92
$0.92
○(R3) Addition + Alteration SFD, 200 SF min & 1,500 SF max - each
Flat fee $0.88
$0.88
○(B, M, I) Business, Mercantile, Institutional new commercial, 2,000 SF min & 20,000 SF max - each
Flat fee $0.47
$0.47
○Tenant Improvement, existing commercial, 1,500 SF min & 30,000 SF max - each
Flat fee $0.39
$0.39
○Permit issuance, each
Flat fee $41.00
$41.00
○Building plan check, per hour
Flat fee $87.00
$87.00
○Building inspection, per hour
Flat fee $87.00
$87.00
○Building reinspection, each
Flat fee $98.00
$98.00
Strong Motion Instrumentation Program (SMIP) fee, residential structures
valuation x 0.00013
see rule
Strong Motion Instrumentation Program (SMIP) fee, commercial structures
valuation x 0.00028
see rule
California Building Standards fee
$1.00 per every $25,000 or portion thereof, in construction valuation
see rule
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
Shell only · add-on
60% of building permit + plan check fee — select the permit fee line above to calculate
see rule
Foundation only · add-on
25% of building permit + plan check fee — select the permit fee line above to calculate
see rule
How this jurisdiction calculates the fee

Riverside prices new construction and major alteration per square foot by occupancy and use rather than from a construction valuation table, and the schedule publishes the same amount in both the plan check fee and the permit fee columns, so a project is charged both. Each rate carries a minimum and maximum project size and a project below the minimum is billed at the minimum - the schedule's own example notes that a 900 SF tenant improvement pays the same as a 1,500 SF one. A flat permit issuance fee applies per permit. Valuation still drives two state-related charges: the Strong Motion Instrumentation Program fee and the California Building Standards fee. All plan check and permit fees then carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge. Community Economic Development Department, Building and Safety fee schedule effective July 1, 2026.

Source: published fee schedule · Verified 11/4/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Decks, balconies, stairways 500 SF or less
Flat fee $174.00
$174.00
○Decks, balconies, stairways, for each additional 500 SF
Flat fee $75.00
$75.00
○Residential lattice patio cover 400 SF or less
Flat fee $83.00
$83.00
○Residential patio cover 400 SF or less
Flat fee $107.50
$107.50
○Permit issuance, each
Flat fee $41.00
$41.00
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
How this jurisdiction calculates the fee

Decks, balconies and stairways are charged a flat fee based on area, and the schedule publishes the same amount as both the plan check fee and the permit fee. A permit issuance fee applies to each permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge.

Source: published fee schedule · Verified 11/2/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Electrical service 0-200 amp, each
Flat fee $45.00
$45.00
○Electrical service 201-1,000 amp, each
Flat fee $80.00
$80.00
○Electrical service 1,000+ amp, each
Flat fee $176.00
$176.00
○Dwelling re-wire, partial, each
Flat fee $51.50
$51.50
○Dwelling re-wire, full, each
Flat fee $94.00
$94.00
○EV charger, residential, each
Flat fee $33.00
$33.00
○Outlets and receptacles, each
Flat fee $0.83
$0.83
○Light switches and occupancy sensors, each
Flat fee $0.83
$0.83
○Lighting fixture, each
Flat fee $5.50
$5.50
○Dedicated circuit, each
Flat fee $5.00
$5.00
○Meter pedestal, each
Flat fee $49.00
$49.00
○Meter reset, each
Flat fee $28.50
$28.50
○Temporary power pole, each
Flat fee $16.50
$16.50
○Electrical switchboard sub-panels 0-600 V, each
Flat fee $20.50
$20.50
○Other equipment or devices, not specified, each
Flat fee $28.50
$28.50
○Permit issuance, each
Flat fee $41.00
$41.00
How this jurisdiction calculates the fee

Electrical work is charged a flat fee for each device, circuit or item of equipment, and the schedule publishes the same amount as both the plan check fee and the permit fee. A permit issuance fee applies to each permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge.

Source: published fee schedule · Verified 11/2/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Block Walls/Fence 100 LF or less - charged as plan check fee and again as permit fee
Flat fee $71.00
$71.00
○Block Walls/Fence, for each additional 100 LF - each
Flat fee $17.50
$17.50
○Retaining Walls 100 LF or less (where the wall also retains) - each
Flat fee $102.50
$102.50
○Permit issuance, each
Flat fee $41.00
$41.00
California Building Standards fee
$1.00 per every $25,000 or portion thereof, in construction valuation
see rule
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
How this jurisdiction calculates the fee

Block walls and fences are charged a flat fee for the first 100 linear feet plus a smaller flat increment for each additional 100 linear feet, and the schedule publishes the same amount as both the plan check fee and the permit fee, so both are charged. A flat permit issuance fee applies per permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge. Community Economic Development Department, Building and Safety fee schedule effective July 1, 2026.

Source: published fee schedule · Verified 11/2/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential Re-roof (Overlay) 1,000 SF or less - charged as plan check fee and again as permit fee
Flat fee $51.50
$51.50
○Residential Re-roof (Overlay), for each additional 500 SF - each
Flat fee $12.50
$12.50
○Residential Re-roof (Tear off & Re-roof) 1,000 SF or less - each
Flat fee $61.50
$61.50
○Residential Re-roof (Tear off & Re-roof), for each additional 500 SF - each
Flat fee $12.50
$12.50
○Residential Re-roof (Tear off & new sheathing) 1,000 SF or less - each
Flat fee $89.00
$89.00
○Residential Re-roof (Tear off & new sheathing), for each additional 500 SF - each
Flat fee $12.50
$12.50
○Commercial Re-roof (Overlay) 35,000 SF or less - each
Flat fee $256.00
$256.00
○Commercial Re-roof (Tear off & Re-roof) 35,000 SF or less - each
Flat fee $290.50
$290.50
○Commercial Re-roof (Tear off & new sheathing) 35,000 SF or less - each
Flat fee $338.00
$338.00
○Self-Certification Re-roof (permit fee only, no plan check fee)
Flat fee $61.00
$61.00
○Permit issuance, each
Flat fee $41.00
$41.00
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
How this jurisdiction calculates the fee

Re-roofing is charged a flat fee set by the roofing method - overlay, tear off and re-roof, or tear off with new sheathing - for a base area, plus a flat increment for each additional area band; residential bands run in 1,000 SF then 500 SF steps and commercial bands in 35,000 SF steps. The schedule publishes the same amount as both the plan check fee and the permit fee, so both are charged, except for a self-certification re-roof which carries a permit fee only and no plan check fee. A flat permit issuance fee applies per permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge. Community Economic Development Department, Building and Safety fee schedule effective July 1, 2026.

Source: published fee schedule · Verified 11/2/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Retaining Walls 100 LF or less - charged as plan check fee and again as permit fee
Flat fee $102.50
$102.50
○Retaining Walls, for each additional 100 LF - each
Flat fee $45.00
$45.00
○Site Improvements 3,000 SF or less - each
Flat fee $652.00
$652.00
○Permit issuance, each
Flat fee $41.00
$41.00
California Building Standards fee
$1.00 per every $25,000 or portion thereof, in construction valuation
see rule
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
How this jurisdiction calculates the fee

Retaining walls are charged a flat fee for the first 100 linear feet plus a flat increment for each additional 100 linear feet, and the schedule publishes the same amount as both the plan check fee and the permit fee, so both are charged. A flat permit issuance fee applies per permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge. Community Economic Development Department, Building and Safety fee schedule effective July 1, 2026.

Source: published fee schedule · Verified 11/4/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○(U) Accessory Structures, 400 SF min & 3,000 SF max - charged as plan check fee and again as permit fee
Flat fee $0.40
$0.40
○Minimum charge for a Group U accessory structure (400 SF minimum x $0.40), as plan check fee and again as permit fee
Flat fee $160.00
$160.00
○Structures Other Than Buildings (flat fee) - each
Flat fee $225.00
$225.00
○Permit issuance, each
Flat fee $41.00
$41.00
California Building Standards fee
$1.00 per every $25,000 or portion thereof, in construction valuation
see rule
General Plan Maintenance surcharge on all plan check and permit fees
10%
see rule
Technology surcharge on all plan check and permit fees
4%
see rule
How this jurisdiction calculates the fee

A shed is a Group U accessory structure and is priced per square foot under the schedule's Miscellaneous Structures line, with a 400 SF minimum and a 3,000 SF maximum - so a shed smaller than 400 SF is charged at the 400 SF minimum. The schedule publishes the same amount as both the plan check fee and the permit fee, so both are charged. A flat permit issuance fee applies per permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge. Community Economic Development Department, Building and Safety fee schedule effective July 1, 2026.

Source: published fee schedule · Verified 11/2/2026

Water Heater Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Water heater up to 100,000 BTU, each
Flat fee $18.50
$18.50
○Water heater 100,001-1,000,000 BTU, each
Flat fee $28.50
$28.50
○Water heater 1,000,001+ BTU, each
Flat fee $51.50
$51.50
○Water heater gas vent, each
Flat fee $9.00
$9.00
○Water piping, each
Flat fee $3.50
$3.50
○Water service, each
Flat fee $33.00
$33.00
○Pressure regulator, each
Flat fee $12.00
$12.00
○Solar or hydronic systems, each
Flat fee $108.50
$108.50
○Dwellings re-pipe, full, each
Flat fee $59.00
$59.00
○Other fixtures or apparatus, not specified, each
Flat fee $35.00
$35.00
○Permit issuance, each
Flat fee $41.00
$41.00
How this jurisdiction calculates the fee

Plumbing work is charged a flat fee for each fixture or item installed, and the schedule publishes the same amount as both the plan check fee and the permit fee. A permit issuance fee applies to each permit, and all plan check and permit fees carry a 10% General Plan Maintenance surcharge and a 4% Technology surcharge.

Source: published fee schedule · Verified 11/4/2026

See the full write-up: Riverside building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.