San Diego, California Building Permit Cost Calculator
Estimates permit cost in San Diego from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Single dwelling unit or duplex, plan check, base 3,000 sq. ft. $8,085.26 plus $4.10 for each additional square foot | see rule |
Single dwelling unit or duplex, inspection, base 3,000 sq. ft. $8,401.90 plus $4.21 for each additional square foot | see rule |
Single dwelling unit or duplex addition or remodel, plan check, base 500 sq. ft. $3,512.92 plus $6.98 for each additional square foot | see rule |
Single dwelling unit or duplex addition or remodel, inspection, base 500 sq. ft. $2,228.29 plus $4.46 for each additional square foot | see rule |
○General Plan Maintenance Fee Flat fee $737.00 | $737.00 |
○Mapping Fee Flat fee $12.16 | $12.16 |
○Lead Hazard Prevention Fee, structures built before 1978 Flat fee $58.00 | $58.00 |
Express plan check administration fee $793.95 plus 1.5 times the regular plan check fee | see rule |
How this jurisdiction calculates the fee
Plan check and inspection fees are charged separately, each as a base rate covering a base quantity of floor area plus an increment rate for every additional square foot.
Source: published fee schedule · Verified 11/10/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Deck built from pre-approved plans, each building $1,148.29 plan check and $264.25 inspection | see rule |
Deck, single dwelling unit, duplex or townhouse, up to 500 sq. ft. $1,677.99 plan check and $264.25 inspection | see rule |
Deck, single dwelling unit, duplex or townhouse, over 500 sq. ft. $2,649.60 plan check and $440.82 inspection | see rule |
How this jurisdiction calculates the fee
Deck plan check and inspection fees are flat amounts per building, set by deck area, with a lower plan check fee when pre-approved plans are used.
Source: published fee schedule · Verified 11/10/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Circuits 15 to 45 amps, first 5 circuits Flat fee $176.57 | $176.57 |
○Circuits 15 to 45 amps, 6 to 10 circuits, each additional Flat fee $52.39 | $52.39 |
○Circuits 15 to 45 amps, each additional 10 circuits over 10, up to 50 Flat fee $52.39 | $52.39 |
○Circuits 15 to 45 amps, each additional 50 circuits over 50 Flat fee $141.28 | $141.28 |
○Circuits 50 to 200 amps, each 3 circuits Flat fee $353.13 | $353.13 |
○Circuits 225 to 400 amps, each 2 circuits Flat fee $353.13 | $353.13 |
○Panel replacement or upgrade up to 200 amps, each Flat fee $176.57 | $176.57 |
○Conduit and junction box only, each Flat fee $176.57 | $176.57 |
○Generator only, each Flat fee $176.57 | $176.57 |
○Temporary pole for construction power, each Flat fee $176.57 | $176.57 |
How this jurisdiction calculates the fee
Electrical permit fees are charged per building based on circuit count and amperage, with flat per-item fees for panels, generators and temporary power. Figures refreshed to Information Bulletin 103, May 2026 revision. The previously stored amounts came from the April 2026 revision and were superseded by a 7.25% across-the-board increase; every one of them understated the current fee.
Source: published fee schedule · Verified 11/13/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Fence, masonry or non-masonry, over 7 feet high, per 100 linear feet $2,031.00 plan check base rate and $970.52 for each additional; $529.71 inspection base rate and $353.13 for each additional | see rule |
Fence, masonry or non-masonry, City standard, each 100 linear feet $1,148.29 plan check base rate and $1,148.29 for each additional; $353.13 inspection base rate and $353.13 for each additional | see rule |
How this jurisdiction calculates the fee
Fence plan check and inspection fees are charged per 100 linear feet, at a base rate for the first unit of length plus an additional rate for each further unit; fences of varying height are calculated using the greatest wall height.
Source: published fee schedule · Verified 11/10/2026
Reroof Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Roof structure replacement, each 2,000 sq. ft. $1,942.13 plan check base rate and $617.38 for each additional; $264.25 inspection base rate and $264.25 for each additional | see rule |
Roof re-sheathing, single dwelling unit, duplex or townhouse, each building Plan check charged hourly; $264.25 inspection | see rule |
Repair or replace in kind, each building $529.71 inspection | see rule |
How this jurisdiction calculates the fee
Roof work is charged from the miscellaneous items table, with roof structure replacement priced per 2,000 square feet and roof re-sheathing charged at the hourly plan check rate plus a flat inspection fee. SOURCE SUPERSESSION CORRECTED 2026-09-18 (lane B run 1482): the previously cited PDF https://www.sandiego.gov/sites/default/files/2026-02/dsdib123.pdf still returns HTTP 200 but the IB-123 page now lists it under "Previous Versions of this Information Bulletin ... by the last day they were effective" as "2026-09-08 | IB-123". The operative edition is INFORMATION BULLETIN 123, September 2026, published as the live web page, and source_url has been repointed to it. NO FIGURE CHANGED: IB-123 section VI carries no amounts and directs all fees to IB-501. Every stored figure re-verified 2026-09-18 against the live IB-501 (August 2026): Roof Structure Replacement, each 2,000 sq ft = $1,942.13 / $617.38 plan check and $264.25 / $264.25 inspection; Roof Re-sheathing SDU/DUP/TH = hourly plan check, $264.25 inspection; Repair/Replace In Kind, each building = $529.71 inspection.
Source: published fee schedule · Verified 11/10/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Retaining wall, City standard, each 50 linear feet $1,677.99 plan check base rate and $1,148.29 for each additional; $353.13 inspection base rate and $176.57 for each additional | see rule |
Retaining wall with calculations, less than 6 feet high, per 50 linear feet $2,207.58 plan check base rate and $1,148.29 for each additional; $529.71 inspection base rate and $176.57 for each additional | see rule |
Retaining wall with calculations, over 6 feet high, per 50 linear feet $2,913.84 plan check base rate and $1,148.29 for each additional; $529.71 inspection base rate and $264.25 for each additional | see rule |
How this jurisdiction calculates the fee
Retaining wall plan check and inspection fees are charged per 50 linear feet at a base rate plus an additional rate for each further unit of length, with walls of varying height calculated using the greatest wall height.
Source: published fee schedule · Verified 11/10/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Garage or storage structure, single dwelling unit, duplex or townhouse, each $1,501.42 plan check; inspection charged hourly | see rule |
How this jurisdiction calculates the fee
Detached garage and storage structures serving a single dwelling unit, duplex or townhouse are charged a flat plan check fee per structure, with inspection charged at the hourly rate.
Source: published fee schedule · Verified 11/10/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Water heater, each Flat fee $122.97 | $122.97 |
○Solar water heating system, each Flat fee $176.57 | $176.57 |
How this jurisdiction calculates the fee
Plumbing permit fees are charged per item installed. Figures refreshed to Information Bulletin 103, May 2026 revision. The previously stored amounts came from the April 2026 revision and were superseded by a 7.25% across-the-board increase; every one of them understated the current fee.
Source: published fee schedule · Verified 11/13/2026
See the full write-up: San Diego building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.