Winston-Salem, North Carolina Building Permit Cost Calculator
Estimates permit cost in Winston-Salem from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Single-family new residential, building $0.15 x 2,000 = $300.00 | $300.00 |
○Single-family new residential, electrical $0.09 x 2,000 = $180.00 | $180.00 |
○Single-family new residential, plumbing $0.09 x 2,000 = $180.00 | $180.00 |
○Single-family new residential, mechanical $0.09 x 2,000 = $180.00 | $180.00 |
○Single-family new residential, gas appliances Flat fee $100.00 | $100.00 |
○Building permit fee shall not be less than Flat fee $100.00 | $100.00 |
○Homeowners Recovery Fund fee, G.S. 87-15.6 Flat fee $10.00 | $10.00 |
○Zoning review - residential, added to the building permit Flat fee $25.00 | $25.00 |
○Zoning review and inspection - residential, added to the building permit Flat fee $65.00 | $65.00 |
○Erosion control, single family, added to the building permit Flat fee $40.00 | $40.00 |
○Townhouse, condo, twin home or urban home, per unit, building Flat fee $206.00 | $206.00 |
Extra trip charge after the first failed inspection: second trip, third trip, all others $50.00 / $75.00 / $100.00 | see rule |
Starting work without a permit Double the permit fee | see rule |
How this jurisdiction calculates the fee
Winston-Salem/Forsyth County Planning and Development Services, Inspections Division fee schedule dated April 2026. New single-family residential fees are charged on the square footage of the building, with a separate per-square-foot rate for each trade permit, and no building permit fee may be less than $100. A $10.00 Homeowners Recovery Fund fee is collected under G.S. 87-15.6 on new single-family permits issued to North Carolina licensed contractors. Residential zoning review and single-family erosion control charges are added to the building permit.
Source: published fee schedule · Verified 11/4/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Single-family additions, building $0.15 x 2,000 = $300.00 | $300.00 |
Single-family additions, stated minimums $100 minimum building; $75 minimum trades | see rule |
○Single-family alterations/repairs, building $0.08 x 2,000 = $160.00 | $160.00 |
○Value-based table, residential remodels and repairs, value $0.00 through $5,000.00 Flat fee $100.00 | $100.00 |
Value-based table, value $5,000.01 through $50,000.00 $100.00 plus $4.00 for each $1,000 or fraction over $5,000.00 | see rule |
○Building permit fee shall not be less than Flat fee $100.00 | $100.00 |
○Zoning review - residential, added to the building permit Flat fee $25.00 | $25.00 |
Extra trip charge after the first failed inspection: second trip, third trip, all others $50.00 / $75.00 / $100.00 | see rule |
Starting work without a permit Double the permit fee | see rule |
How this jurisdiction calculates the fee
Winston-Salem/Forsyth County Inspections Division fee schedule dated April 2026. The schedule carries no deck-specific line item. Residential work on a single-family dwelling is priced on the square footage of the building - one rate for additions, a lower rate for alterations and repairs - while residential remodels and repairs may alternatively be assessed from the value-based table the schedule shares with nonresidential construction. Both paths are floored: no building permit fee may be less than $100, with a $75 minimum on each trade permit, so a typical residential deck resolves to the minimum. Residential zoning review is added to the building permit.
Source: published fee schedule · Verified 11/4/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Single-family new residential electrical, per square foot Flat fee $0.09 | $0.09 |
○Temporary saw service (not included in the square-foot electrical fee) Flat fee $75.00 | $75.00 |
○Rough hot outlets and fixtures, 1-50 Flat fee $24.00 | $24.00 |
○Appliances and equipment (including but not limited to ranges, furnaces, dishwashers, subpanels, etc.), each appliance Flat fee $7.50 | $7.50 |
○Change of service, residential Flat fee $84.00 | $84.00 |
○Reconnect current, residential Flat fee $75.00 | $75.00 |
○Minimum fee due for any electrical permit Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Electrical fees for new single-family construction are charged per square foot; fees for alterations, additions and repairs to existing residential buildings are charged per outlet, appliance or service item, and every electrical permit carries a minimum fee.
Source: published fee schedule · Verified 11/11/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Fence permit, per square footage of the proposed fence $.15/square foot with a $100.00 minimum | see rule |
○Homeowner's Recovery Fee, added for state licensed contractors Flat fee $10.00 | $10.00 |
How this jurisdiction calculates the fee
The permit fee is based on the square footage of the proposed fence.
Source: published fee schedule · Verified 11/11/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Building permit fee shall not be less than Flat fee $100.00 | $100.00 |
○Value-based table, value $0.00 through $5,000.00 Flat fee $100.00 | $100.00 |
Value-based table, value $5,000.01 through $50,000.00 $100.00 plus $4.00 for each $1,000 or fraction over $5,000.00 | see rule |
Value-based table, value $50,000.01 through $100,000.00 $232.00 plus $3.00 for each $1,000 or fraction over $50,000.00 | see rule |
○Zoning review - residential, added to the building permit Flat fee $25.00 | $25.00 |
Extra trip charge after the first failed inspection: second trip, third trip, all others $50.00 / $75.00 / $100.00 | see rule |
Starting work without a permit Double the permit fee | see rule |
How this jurisdiction calculates the fee
A retaining wall permit is required and is filed as a residential single-family building permit application through the citys GeoCivix portal, but the Winston-Salem/Forsyth County Inspections Division fee schedule dated April 2026 publishes no retaining-wall line item. The schedule prices work either on building square footage (single-family construction, additions, alterations) or on construction value (the table it uses for nonresidential construction and for residential remodels, repairs and demolitions), and it floors every building permit at $100. Because no published line names a retaining wall, the exact figure has to be confirmed with the Inspections Division; the amounts below are the general provisions of the schedule that do apply.
Source: published fee schedule · Verified 11/4/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Building permit fee shall not be less than Flat fee $100.00 | $100.00 |
○Single-family additions, building $0.15 x 2,000 = $300.00 | $300.00 |
Single-family additions, stated minimums $100 minimum building; $75 minimum trades | see rule |
○Value-based table, value $0.00 through $5,000.00 Flat fee $100.00 | $100.00 |
○Zoning review - residential, added to the building permit Flat fee $25.00 | $25.00 |
○Zoning permit, administrative only, no inspection Flat fee $25.00 | $25.00 |
○Zoning permit where zoning plan review and zoning inspection are required Flat fee $100.00 | $100.00 |
Starting work without a permit Double the permit fee | see rule |
How this jurisdiction calculates the fee
Winston-Salem/Forsyth County Inspections Division fee schedule dated April 2026. Accessory buildings such as storage buildings and sheds are filed as residential single-family building permit applications, but the schedule publishes no accessory-building or shed line item. Residential building work is priced on the square footage of the building, and every building permit is floored at $100, so a shed resolves to that minimum unless it is large enough for the square-footage rate to exceed it. A residential zoning review charge is added to the building permit, and a stand-alone zoning permit is priced separately where no building permit is involved.
Source: published fee schedule · Verified 11/5/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
Plumbing water heater changeout permits (includes electrical) Flat fee $ 100.00 | see rule |
○Plumbed fixtures, appliances, interceptors and sewer ejectors to be installed or replaced, including but not limited to sinks, water closets, floor drains, dishwashers, disposals and water heaters, each Flat fee $10.00 | $10.00 |
○Minimum fee for any plumbing permit Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
A flat fee applies to a water heater changeout permit; plumbed fixtures and appliances installed or replaced in existing residential buildings are otherwise charged per item, and every plumbing permit carries a minimum fee.
Source: published fee schedule · Verified 11/11/2026
See the full write-up: Winston-Salem building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.