Murfreesboro, Tennessee Building Permit Cost Calculator
Estimates permit cost in Murfreesboro from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
How this jurisdiction calculates the fee
Fees for new dwelling construction are based on heated and unheated square footage; fees for additions, alterations, and renovations are based on construction cost.
Source: published fee schedule · Verified 8/17/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Per $1,000 of construction cost Flat fee $8.00 | $8.00 |
○Minimum permit fee Flat fee $50.00 | $50.00 |
How this jurisdiction calculates the fee
Permit fees are based on the cost of construction: $8.00 for every $1,000 of construction cost, with a $50.00 minimum permit fee.
Source: published fee schedule · Verified 9/15/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○New construction base fee (one- and two-family and multi-family dwellings) Flat fee $50.00 | $50.00 |
New construction combo, 0-200 amps (rough-in, service release and final) $100.00/Unit | see rule |
Remodel and addition to one- and two-family dwellings, 0-200 amps (rough-in, service release and final) $100.00/Unit | see rule |
Remodel and addition, 201-400 amps $120.00/Unit | see rule |
Remodel and addition, over 400 amps $140.00/Unit | see rule |
○Service repair/change out Flat fee $50.00 | $50.00 |
○Additional inspection after a combo permit Flat fee $50.00 | $50.00 |
How this jurisdiction calculates the fee
Residential electrical permit fees are charged per combination of inspections and amperage, with a $50.00 base fee required for new construction of one- and two-family and multi-family dwellings and no base fee for remodels and additions.
Source: published fee schedule · Verified 9/15/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
How this jurisdiction calculates the fee
The Building and Codes Department's Accessory Structure and Fence Permits Information page states the permit fee is based on the valuation of the construction; the Schedule of Permit Fees adopted by Resolution 26-R-10, effective June 1, 2026, sets a flat $75.00 permit fee for a fence constructed on a residential property.
Source: published fee schedule · Verified 8/17/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Base permit fee Flat fee $50.00 | $50.00 |
○Water heater Flat fee $20.00 | $20.00 |
○Water heater (tankless) Flat fee $20.00 | $20.00 |
○Water heater (in line) Flat fee $20.00 | $20.00 |
○Water heater (solar) Flat fee $20.00 | $20.00 |
○Water heater (vent) Flat fee $20.00 | $20.00 |
○Water line (new, altered, or replaced) Flat fee $40.00 | $40.00 |
How this jurisdiction calculates the fee
A plumbing permit carries a $50.00 base permit fee plus an inspection fee for each fixture, which is $8.00 unless noted at a different amount.
Source: published fee schedule · Verified 9/15/2026
See the full write-up: Murfreesboro building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.