Tarrant County, Texas Building Permit Cost Calculator
Estimates permit cost in Tarrant County from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County building permit for a house (none exists) Flat fee $0.00 | $0.00 |
○Floodplain development permit, if in a mapped floodplain Flat fee $0.00 | $0.00 |
Fire Code construction permit, commercial/multifamily only, per 1,000 sq ft $100.00-$200.00 | see rule |
How this jurisdiction calculates the fee
No county building-permit fee exists for one- and two-family work; Loc. Gov't Code Sec. 233.153(f) prohibits a county fee and the county's own page states it 'can not charge fees.' The builder pays the private third-party inspectors directly at market rates. The county Floodplain Permit, where triggered, is issued at no charge. Fire Code construction-permit fees apply only to commercial, public and 4+ unit multifamily buildings. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free." source_url repointed: the previously cited Rules and Reporting Forms for Residential Construction in Unincorporated Areas page now returns HTTP 404 and its content is carried by the Guideline PDF, which is live. CAVEAT: the Fire Code construction-permit range of $100.00-$200.00 per 1,000 sq ft could not be re-confirmed this pass - the Fire Marshal fire-prevention permits-and-fees page returns 404 and the reachable Fire Marshal landing page publishes no fee figures. The two $0.00 figures, which are the substance of this row, are confirmed. SOURCING GAP FOUND 2026-09-15 (run 1291), NOT GUESSED, FIGURES LEFT AS STORED: the two substantive lines on this row verify today. The Guideline for Development in Unincorporated Areas of Tarrant County states in full that "Tarrant County does not issue Building Permits or Certificates of Occupancy for residential homes" and that the County "does not have the authority to perform building inspections or charge inspection fees"; the Engineering floodplain-permits page states "All work within a FEMA designated floodplain requires a Floodplain Permit. The floodplain permit is free." The third line, "Fire Code construction permit, commercial/multifamily only, per 1,000 sq ft = $100.00-$200.00", appears in NEITHER cited document, and tarrantcountytx.gov/en/fire-marshal/fire-inspections/construction-permits.html returns 404 (a real 404, not a 403), so no Fire Marshal fee schedule could be located on the county domain this pass. It was deliberately not guessed at or replaced. HUMAN ACTION: source the Fire Marshal construction-permit fee from the county Fire Marshal's own published schedule, or drop the line - it is also scoped to commercial/multifamily and so does not price the residential building permit this row describes.
Source: published fee schedule · Verified 9/15/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County deck permit (none exists) Flat fee $0.00 | $0.00 |
○Floodplain development permit, if in a mapped floodplain Flat fee $0.00 | $0.00 |
How this jurisdiction calculates the fee
No county fee applies to a residential deck; where the site is in a mapped floodplain the required Floodplain Permit is issued at no charge. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free."
Source: published fee schedule · Verified 9/15/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County fence permit (none exists) Flat fee $0.00 | $0.00 |
○Floodplain development permit, if in a mapped floodplain Flat fee $0.00 | $0.00 |
How this jurisdiction calculates the fee
No county fee applies to a residential fence; the Floodplain Permit required for work in a mapped floodplain is issued at no charge. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free."
Source: published fee schedule · Verified 9/15/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County retaining wall permit (none exists) Flat fee $0.00 | $0.00 |
○Floodplain development permit, if in a mapped floodplain Flat fee $0.00 | $0.00 |
How this jurisdiction calculates the fee
No county building-permit fee exists for a retaining wall; the Floodplain Permit required for work in a mapped floodplain is issued at no charge. Fees for county right-of-way/encroachment permits are not published on the county permitting pages. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free."
Source: published fee schedule · Verified 9/15/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County shed permit (none exists) Flat fee $0.00 | $0.00 |
○Floodplain development permit, if in a mapped floodplain Flat fee $0.00 | $0.00 |
How this jurisdiction calculates the fee
No county fee applies to a residential shed; the Floodplain Permit required for work in a mapped floodplain is issued at no charge. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free."
Source: published fee schedule · Verified 9/15/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○County water heater permit (none exists) Flat fee $0.00 | $0.00 |
○Residential OSSF (septic) permit incl. plan review and two inspections Flat fee $260.00 | $260.00 |
○Additional OSSF inspection Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
No county fee attaches to a water heater replacement because no county plumbing permit exists. The nearest county charge is the on-site sewage facility permit when septic work is involved: $260.00 covering application, assessment, plan review and two inspections, with $75.00 for each additional inspection. Re-verified 2026-09-10 against the county's own documents: the Guideline for Development in Unincorporated Areas of Tarrant County still states "Tarrant County does not have the authority to perform building inspections or charge inspection fees", and the Engineering Services Floodplain Permits page (last modified May 05, 2026) states in terms "The floodplain permit is free." The Residential OSSF Permit Packet still prints the $260.00 permit fee covering application, assessment, plan review and two inspections and the $75.00 fee for each additional inspection (it also charges a separate $15.00 Tarrant County Clerk fee, which is not recorded here).
Source: published fee schedule · Verified 9/15/2026
See the full write-up: Tarrant County building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.