B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
29 CFR Part 1910Public Domain

§ 1910.122 — Table of contents

Subpart H — Hazardous Materials

This section lists the paragraph headings contained in §§ 1910.123 through 1910.126. § 1910.123 Dipping and coating operations: Coverage and definitions.

(a)Does this rule apply to me?

(b)What operations are covered?

(c)What operations are not covered?

(d)How are terms used in §§ 1910.123 through 1910.126 defined? § 1910.124 General requirements for dipping and coating operations.

(a)What construction requirements apply to dip tanks?

(b)What ventilation requirements apply to vapor areas?

(c)What requirements must I follow to recirculate exhaust air into the workplace?

(d)What must I do when I use an exhaust hood?

(e)What requirements must I follow when an employee enters a dip tank?

(f)What first-aid procedures must my employees know?

(g)What hygiene facilities must I provide?

(h)What treatment and first aid must I provide?

(i)What must I do before an employee cleans a dip tank?

(j)What must I do to inspect and maintain my dipping or coating operation? § 1910.125 Additional requirements for dipping and coating operations that use flammable or combustible liquids.

(a)What type of construction material must be used in making my dip tank?

(b)When must I provide overflow piping?

(c)When must I provide a bottom drain?

(d)When must my conveyer system shut down automatically?

(e)What ignition and fuel sources must be controlled?

(f)What fire protection must I provide?

(g)To what temperature may I heat a liquid in a dip tank? § 1910.126 Additional requirements for special dipping and coating operations.

(a)What additional requirements apply to hardening or tempering tanks?

(b)What additional requirements apply to flow coating?

(c)What additional requirements apply to roll coating, roll spreading, or roll impregnating?

(d)What additional requirements apply to vapor degreasing tanks?

(e)What additional requirements apply to cyanide tanks?

(f)What additional requirements apply to spray cleaning tanks and spray degreasing tanks?

(g)What additional requirements apply to electrostatic paint detearing?

Public Domain: 29 CFR Part 1910 (OSHA General Industry Standards) is a U.S. government publication and is not subject to copyright. Text extracted from the official source ↗. Figures are served from the eCFR; if one does not load, use the link in its place.
OSHA 1910 1910.122 — Table of contents | BuildSpec