680-1 Description.
Furnish and install system control equipment as shown in the Plans. Meet the requirements of Section 603.
680-2 Materials.
680-2.1 General: Use system control equipment and components listed on the
Department’s Approved Product List (APL).
680-3 Installation.
Install all system control equipment in accordance with the manufacturer’s recommendations . Terminate wires on the appropriate terminal strips in the controller cabinet with insulated terminal lugs. Neatly bundle, secure, and identify all wiring and cables.
680-4 Warranty.
Ensure system control equipment has a manufacturer’s warranty covering defects for a minimum of three years. The war ranty must include provisions for providing replacements within 10 calendar days of notification for defective parts and equipment during the warranty period at no cost to the Department or the maintaining agency.
680-5 Method of Measurement.
The Contract unit price for system control equipment, furnished and installed, will include all materials, equipment, hardware labor and miscellaneous materials necessary for a complete and accepted installation.
680-6 Basis of Payment.
Price and payment will be full compensation for all work specified in this Section. Payment will be made under: Item No. 680 1 System Control Equipment - each. FY 2023-24 Return to Table of Contents SECTION 682 VIDEO EQUIPMENT
682-1 CCTV Camera.
682-1.1 Description : Furnish and install a closed -circuit television (CCTV) camera at the
locations shown in the Plans. The installed equipment must provide video images of the roadway, traffic, and other current conditions around a roadside CCTV field site; respond to camera control signals from the operator; and transmit video images to remote locations for observation.
682-1.2 Materials : All equipment shall be permanently marked with manufacturer name
or trademark, part number, and date of manufacture or serial number. Meet the requirements of Section 603. Provide a CCTV camera that is compatible with any camera operating software indicated in the Contract Documents. Cameras are classified by camer a type and video type. Provide the appropriate type for the locations shown in the Plans. Use only equipment and components that meet the requirements of Section 996 and are listed on the Department’s Approved Product List (APL). All CCTV cameras must su pport the communication links shown in the Plans. Unshielded twisted pair/shielded twisted pair network cables must be compliant with the TIA-568 Standard.
682-1.3 Installation : Install the CCTV camera on a pole in accordance with Standard
Plans, Indexes 641-020, 649-020, and 659 -020, and as shown in the Plans. Furnish and install the power supplies and any other camera -related field electronic equipment and transient voltage surge suppressors within a pole - or base-mounted lockable cabinet. The cabinet must meet the requirements of Section 676. Furnish and install all power, video, and data cables necessary to provide connection points for camera video and PTZ control signals within the cabinet. Furnish and install any and all ancillary equipment requ ired to provide a complete and fully operational CCTV camera. Verify that all wiring meets National Electric Code (NEC) requirements where applicable. Route the data and video cables from the pole or support structure to the camera inside the mounting ha rdware and protect from exposure to the outside environment. Coat the exterior of the dome -type enclosure’s lower half with a clear, rain repellant product prior to final acceptance.
682-1.4 Field Acceptance Testing: Conduct field acceptance testing in accordance with
Section 611. Perform local field inspection at each local CCTV field site to verify and confirm the following:
1.Physical construction has been completed as specified in the Plans and all existing and proposed lanes are cle arly visible with no line of site obstructions.
2.The quality and tightness of ground and surge protector connections.
3.Proper voltages for all power supplies and related power circuits.
4.All connections, including correct installation of com munication and power cables.
682-2 Video Display Equipment.
682-2.1 Description : Furnish and install video display equipment as shown in the Plans.
FY 2023-24 Return to Table of Contents
Source: Florida Standard Specifications for Road and Bridge Construction, 2024 Edition. Pages 914–914 of 1,299.