Drilled Shafts Art. 516.02 SECTION 514. RESERVED SECTION 515. NAME PLATES
515.01 Description. This work shall consist of the furnishing and installing of
name plates.
515.02 Materials. Name plates shall be made of brass, bronze, or other
material as provided by the plans. CONSTRUCTION REQUIREMENTS
515.03 General. The general features of design; the type, size, and spacing
of letters and figures; the items of information to be shown on all name plates for structures constructed under a given contract; and the arrangement of these items shall be as shown on the plans. The surface of the name plate shall be polished.
515.04 Installation. Installation of name plates shall be as follows.
a.Concrete Structures. On concrete structures, the name plate shall be embedded in the concrete and fastened by means of four brass or bronze bolts with countersunk heads, or four lugs cast integral with the plate. The bolts or lugs shall project at least 3 in. (75 mm) into the concrete beyond the back of the plate.
b.Steel Truss. On steel truss spans, the plate shall be fastened on the steel member at the fabricating shop by brazing around the entire perimeter of the plate.
c.Steel Rails. On steel rails, the plate shall be bolted on with four, 3/8 x 1 in. (M10 x 25 mm) stainless steel or brass cap screws that are self-tapping or drilled and tapped in the field.
515.05 Basis of Payment. This work will be paid for at the contract unit price
per each for NAME PLATES. SECTION 516. DRILLED SHAFTS
516.01 Description. This work shall consist of constructing drilled shaft
foundations.
516.02 Materials. Materials shall be according to the following.
Item Article/Section
a.Portland Cement Concrete (Note 1) ....................................................... 1020
b.Reinforcement Bars ........................................................................... 1006.10
c.Grout (Note 1) (Note 2) ...................................................................... 1024.01
d.Permanent Steel Casing ................................................................ 1006.05(d)
Referenced in this section
Sections that cite this one
Get an email when 515 changes
Illinois revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Illinois Standard Specifications for Road and Bridge Construction, 2022 Edition. Pages 430–430 of 1,217. View official source ↗