Transceiver-Fiber Optic Art. 864.03 SECTION 863. CONTROLLER CABINET AND PERIPHERAL EQUIPMENT
863.01 Description. This work shall consist of furnishing and installing a
cabinet and peripheral equipment for an existing traffic signal controller.
863.02 Materials. Materials shall be according to the following.
Item Article/Section
a.Controller Cabinet and Peripheral Equipment ................................... 1074.03 CONSTRUCTION REQUIREMENTS
863.03 General. The cabinet shall be furnished with panel, terminal facilities,
malfunction management unit, bus interface unit, load switches, and flasher relays complete with necessary connections for proper operation. The type of cabinet shall be as specified on the plans.
863.04 Basis of Payment. This work will be paid for at the contract unit price
per each for CONTROLLER CABINET, of the type specified. SECTION 864. TRANSCEIVER-FIBER OPTIC
864.01 Description. This work shall consist of furnishing and installing a fiber
optic transceiver for a traffic signal controller. CONSTRUCTION REQUIREMENTS
864.02 General. The fiber optic transceiver shall be installed according to
Section 859 and the following. All fiber optic components, except the interconnect cable itself, required to provide communication between local controllers and/or masters, shall be furnished and installed as part of this item.
864.03 Transceiver Components. The transceiver and all related
components and connections shall be provided for the operation of the fiber optic interconnect communication system in each traffic signal cabinet. These items shall include but not be limited to the following.
a.Distribution Enclosure. Field cable shall terminate in the controller cabinet within a wall-mount distribution enclosure. The distribution enclosure shall seal out dust and moisture. The size shall be sufficient to store all fiber windings and splices. The location of the distribution enclosure shall not restrict access to other controller components. The field cable shall be firmly secured to the enclosure with clamping devices approved by the cable supplier. The cabinet cable shall leave the enclosure through devices to protect the cable against wear. The field cable jacket shall be removed and all protective gel cleaned from the loose tubes as recommended by the
Referenced in this section
Sections that cite this one
Get an email when 863 changes
Illinois revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Illinois Standard Specifications for Road and Bridge Construction, 2022 Edition. Pages 742–742 of 1,217. View official source ↗