B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
General Provisions (00100-00999)

891ILLUMINATED SIGN

IL · 2022 Standard Specifications✓ Full text on BuildSpecBook pages 762–762 Save this section

Ask about Section 891

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

Removal, Relocation, and Rebuilding of Existing Signal Art. 895.02 SECTION 891. ILLUMINATED SIGN

891.01 Description. This work shall consist of furnishing and installing an

illuminated sign.

891.02 Materials. Materials shall be according to the following.

Item Article/Section

a.Illuminated Sign ................................................................................. 1084.01

891.03 Basis of Payment. This work will be paid for at the contract unit price

per each for ILLUMINATED SIGN, FIBER-OPTIC or ILLUMINATED SIGN, LED. REMOVAL AND RELOCATION SECTION 895. REMOVAL, RELOCATION, AND REBUILDING OF EXISTING SIGNAL AND APPURTENANCES

895.01 Description. This work shall consist of the removal, removal and

relocation, and/or the rebuilding of existing signal items and appurtenances in the construction of signalized intersections. CONSTRUCTION REQUIREMENTS

895.02 Relocation. All existing signal items shall be removed and relocated

as shown on the plans. The installation shall be done according to the specifications for the specific item. Any damage done to the existing signal items or appurtenances shall be repaired or replaced by the Contractor at his/her own expense, as directed by the Engineer. Relocation of the existing traffic signal controller and its associated equipment shall also consist of reusing the controller cabinet. Anchor rods, nuts, and washers shall be new for the installation of an existing traffic controller. The controller shall be installed according to Article 857.03. Relocation of an existing signal head shall consist of removing an existing signal head, optically programmed signal head, light emitting diode (LED) signal head, or combination signal head and installing it according to Article 880.03. Installation of the pedestrian signal head shall be according to Article 881.03. Installation of an existing illuminated sign shall be according to Section 891. Relocation of an existing signal post, controller cabinet, or mast arm assembly and pole shall include the removal and installation on a new concrete foundation with new anchor rods, nuts, and washers, according to Article 878.03.

Get an email when 891 changes

Illinois revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Illinois Standard Specifications for Road and Bridge Construction, 2022 Edition. Pages 762–762 of 1,217. View official source ↗

Ask about this section

Scoped to Illinois Standard Specifications for Road and Bridge Construction, Section 891 — ILLUMINATED SIGN. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.