1115 - TEST METHODS FOR DIVISION 1100, AGGREGATES 1100-39
1115.1 General Test Methods
KT tests are general procedures performed in the field and the central laboratory. They are included in Part V. Copies can be obtained by contacting the Plans and Proposals Section in the Bureau of Construction and Materials, the local DME, or the Quality Assurance Section at the Materials and Research Center. Check the special provision regarding test methods to ascertain the date of the latest revision. TITLE TEST METHOD Sampling Aggregates KT-1 Sieve Analysis of Aggregates KT-2 Material Passing No. 200 Sieve by the Wash Method KT-3 Percent Retained on the No. 200 Sieve by Dry Screening KT-4 Unit Weight of Aggregate KT-5 Specific Gravity and Absorption of Aggregate KT-6 Clay Lumps and Friable Particles in Aggregate KT-7 Shale or “Shalelike” Materials in Aggregate KT-8 Plasticity Test KT-10 Moisture Test KT-11 Determination of Free Moisture or Absorption of Aggregate For Use in Concrete KT-24 Determination of Percentage of Crushed Particles in Crushed Gravel KT-31 Sieve Analysis of Extracted Aggregate KT-34 Sticks in Aggregate KT-35 Making, Curing and Testing Cement Treated and Unbound Bases In the Laboratory KT-37 Moisture Contents of Asphalt Mixtures of Mineral Aggregates -Microwave Oven Method KT-43 Uncompacted Void Content of Fine Aggregate KT-50 Plastic Fines in Combined Aggregates by Use of the Sand Equivalent Test KT-55 Flat and Elongated Particles in Coarse Material Test KT-59 1115 - TEST METHODS FOR DIVISION 1100, AGGREGATES 1100-40
1115.2 Materials and Research Center Test Methods
KTMR tests are procedures found at the Materials and Research Center and are not expected to be performed in the field. Copies can be obtained by c ontacting the Quality Assurance Section in the Materials and Research Center. TITLE MR TEST METHOD Permeability for Base Course Material KTMR-5 Soundness and Modified Soundness of Aggregates by Freezing and Thawing KTMR-21 Durable Aggregate Test KTMR-22 Wetting and Drying Test of Sand-Gravel Aggregate for Concrete KTMR-23 Procedures for Testing Lightweight Aggregates KTMR-24 Test Method for Compressive Strength of Hydraulic Cement Mortars Using 2 inch Cube Specimens KTMR-26 Modified Specific Gravity and Absorption of Aggregate KTMR-27 Determination of Total Acid Insoluble Residue KTMR-28
1115.3 Aashto Test Methods
In addition to the test methods referenced above, the following American Association of State Highway and Transportation Officials (AASHTO) test methods are used as written in the current edition of the AASHTO Materials Manual, Part II. Copies can be obtained from AASHTO, or can be viewed at the offices of the local DME, Construction and Materials Headquarters, or the Qu ality Assurance Section in the Materials and Research Center. TITLE AASHTO TEST METHOD Organic Impurities in Fine Aggregates for Concrete AASHTO T 21 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine AASHTO T 96 Lightweight Pieces in Aggregate AASHTO T 113
Get an email when 1115 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.