1611 – PIPE FOR SONIC TESTING 1600-21
1611.1 Description
This specification governs the pipe used for sonic testing as part of the construction of drilled shafts as shown in the Contract Documents.
1611.2 Requirements
Provide 2-inch diameter steel pipe that complies with ASTM A 53 or ASTM A 500, Grade B, Standard Weight. Provide clean pipe (both intern al and external surfaces) w ith watertight joints. If any lacquer or other coating is present, sand blast the pipe prior to installation into the rebar cage. The internal joints shall be flush. Provide screw-on watertight shoes, couplers and caps for the pipes. As an alternative, provide clean, non-threaded pipe , and provide smooth shoes, couplers and caps. Fillet weld each seam.
1611.3 Test Methods
Test according to the requirements of subsection 1611.2.
1611.4 Prequalification
Not applicable.
1611.5 Basis of Acceptance
Receipt and approval of a Type D certification as specified in DIVISION 2600. The final disposition of all components will be complete d at the final destination as the result of inspection for the quality of workmanship and the delivery condition.
Get an email when 1611 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.