B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 2000 — Lime and Cementitious Materials

2007Slag Cement for Use In Concrete and Mortars

KS · 2015 Standard Specifications✓ Full text on BuildSpecBook pages 880–880 Save this section

Ask about Section 2007

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

2007 – SLAG CEMENT FOR USE IN CONCRETE AND MORTARS 2000-11

2007.1 Description

This specification covers slag ceme nt for use in concrete and mortars.

2007.2 Requirements

Provide material that complies with the requirements of ASTM C 989, “Slag Cement for Use in Concrete and Mortars.”

2007.3 Test Methods

As specified in ASTM C 989.

2007.4 Prequalification

a. Manufacturers desiring to provide material under this specification are to submit the following to the Engineer of Tests:

1.A 2-gallon prequalification sample of each product they wish to prequalify.
2.Complete instructions on the use of the material and a Material Safety Data Sheet (MSDS).
3.Copies of quality control test reports for the 6 m onths before to the date of submittal to substantiate a history of satisfactory quality control. Also, provide evidence that the quality control laboratory is regularly inspected by the Cement and Concrete Reference Laboratory (CCRL). b. If the prequalification samples comply with the requirements of subsection 2007.2 , and the other submittals are satisfactory, the name of the product will be placed on a list of prequalified products maintained by the Bureau of Construction and Materials. c. A prequalified plant will retain its prequalified status as long as test results of random samples obtained by KDOT and quality control samp les obtained by the producer indicate that the plant is exercising acceptable quality control. d. A terminal established by a prequalified plant will be considered prequalified to supply slag cement under this specification.

2007.5 Basis of Acceptance

Prequalification as required by subsection 2007.4. Receipt and approval of a Type C certification as specified in DIVISION 2600.

Slag Cement for Use In Concrete and Mortars in other states

Get an email when 2007 changes

Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for State Road and Bridge Construction, 2015 Edition. Pages 880–880 of 978. View official source ↗

Ask about this section

Scoped to Kansas KDOT Standard Specifications for Road & Bridge Construction, Section 2007 — Slag Cement for Use In Concrete and Mortars. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.