B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 2100 — Materials for Roadside Improvements

2104Sods

KS · 2015 Standard Specifications✓ Full text on BuildSpecBook pages 891–891 Save this section

Ask about Section 2104

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

2104 - SODS 2100-9

2104.1 Description

This specification covers the material requirements for various types of sod.

2104.2 Requirements

a. General. Cut the sod uniformly and accord ing to the industry standard for the kind of sod being supplied. Torn, broken, or dry sod is not acceptable. The sod must be strong enough to hold together when rolled and unrolled 3 times; reinforcement netting may be added to sod. Sods containing noxious weeds or quantities of fore ign grass will not be accepte d. Do not furnish sod containing orchard grass, crabgrass, wiregrass (barnyard Bermuda), giant foxtail, bindweed or yellow nut sedge. b. Kentucky Bluegrass Sod. Cut sod strips approximately 1 inch thick, 24 inches wide, and 54 inches long, or in similar dimensions that will produce 1 sq yd. Other dimensions may be approved by the DME. c. Bermuda Grass or Zoysia Grass Sod, Plugs or Strips. Cut this sod approximately 3 inches thick and 12 to 14inches wide. Further division into plugs is to be done at the planting site. d. Turf Type Tall Fescue Sod. Cut the sod strips 1¼ in. thick (±¼ in.), approximately 18 inches wide and 72 inches long, or in similar dimensions that will produce 1 sq yd. Sod content equal to approximately 60% of one or more hybrid varieties of turf type tall fescue and 40% Kentucky bluegrass is required. e. Perennial Wildflower Sod. Cut wildflower sod in pads 20 inches wide and 36 inches long, or some similar measurements that will produce 5 square feet and weighi ng approximately 15 lbs. Provide sod pads composed of densely packed, 3 inches tall perennial wild flower plants with well developed root systems. Provide plants mature enough to bloom within 6 to 8 weeks after planting. Sod containing a minimum of 11 varieties of hardy perennial plants, including: Black-Eyed Susan, Purple Coneflower, Dame's Rocket, Gaillardia, Johnny Jump-Up, Shasta Daisy, Rockcress, and Wallflower is required. Do not allow any grasses in the sod. Use a net-like fabric to allow handling of the sod pads. f. Buffalograss Sod. Cut the sod strips 1 ¼ inches thick, 18 inches wide and 72 inches long, or in similar dimensions that will produce 1square yard. Provide sod containing a minimum of 95% buffalograss.

2104.3 Test Methods

None Specified.

2104.4 Prequalification

None Required.

2104.5 Basis of Acceptance

Visual inspection by the Engineer.

Get an email when 2104 changes

Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for State Road and Bridge Construction, 2015 Edition. Pages 891–891 of 978. View official source ↗

Ask about this section

Scoped to Kansas KDOT Standard Specifications for Road & Bridge Construction, Section 2104 — Sods. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.