909 - MOWING 900-23
909.1 Description
Mow the areas designated by the Engineer. B I D I T E M U N I T S M o w i n g P e r M i l e P e r S i d e
909.2 MATERIALS - None specified.
909.3 Construction Requirements
Use standard manufacture mowing equipment that is adequate for the work designated. Mow only when the ground conditions prevent rutting. If the mowing produces enough clippings and debris to retard the growth of grass, remove and dispose of the clippings and debris.
909.4 Measurement and Payment
The Engineer will measure areas mowed per mile per side for each side of the roadway mowed. The Engineer will use vehicle odometer readings (to the ne arest 0.1 mile) for the measurement of quantities. The Engineer will measure the length of mowed areas along the sh oulder of the side of the roadway that is mowed. Included in this measurement are all mowed areas from the shoulder to the right-of -way line. On multi-lane roadways with medians, mowing in the median is not measured for separate payment. Exceptions less than 0.1 miles, such as a bridge, are not deducted from the measurements. Payment for "Mowing" at the contract unit pr ice is full compensation for the specified work.
Mowing in other states
Get an email when 909 changes
Kansas revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.