B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Category 800 — Traffic

817Push Buttons and Push Button Signs

MD · 2026 Standard Specifications✓ Full text on BuildSpecBook pages 917–918 Save this section

Ask about Section 817

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

817 — PUSH BUTTONS AND PUSH BUTTON SIGNS 2026 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS CATEGORY 800 TRAFFIC SECTION 817 — PUSH BUTTONS AND PUSH BUTTON SIGNS

817.01 Description

Furnish and install pedestrian push button assemblies and push button signs.

817.02 Materials

Retroreflective Sheeting 950.03 Push Button Sign 950.08 Push Buttons A319 The push button assembly shall be weather-tight and tamper proof. The assembly shall be designed to prevent an electrical shock under any weather condition and have provisions for grounding in conformance with the NEC.

a.The push button assembly shall be fabricated from aluminum ingot and have an anodized finish.
b.The push button plunger shall be chrome plated, 2 in. diameter, and have a spring with operative force not to exceed 5 lb.
c.The push button switch shall have single-pole momentary, normally-open, single-throw contacts and spade-type terminals.
d.The switch assembly shall have an operating force of approximately 0.5 lb, but not more than 1 lb.
e.The switch assembly shall be UL approved and electrically rated to carry 25 amps at 120 volts AC.

817.03 Construction

Locate push buttons in positions that clearly indicate to the pedestrian which crosswalks are actuated by each push button. Furnish all mounting hardware and drill holes to provide cable and wire entrances. 817 — PUSH BUTTONS AND PUSH BUTTON SIGNS 2026 STANDARD SPECIFICATIONS FOR CONSTRUCTION AND MATERIALS

817.04 Measurement and Payment

Push buttons and push button signs will be measured and paid for at the Contract unit price per each for the pertinent Push Button and Sign item. The payment will be full compensation for all material, labor, equipment, tools, and incidentals necessary to complete the work.

Referenced in this section
Sections that cite this one

Get an email when 817 changes

Maryland revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for Construction and Materials, 2026 Edition. Pages 917–918 of 1,138. View official source ↗

Ask about this section

Scoped to Maryland Standard Specifications for Construction and Materials, Section 817 — Push Buttons and Push Button Signs. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.