B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Stone and Brick

3612Sewer Brick (Clay)

MN · 2025 Standard Specifications✓ Full text on BuildSpecBook pages 982–0 Save this section

Ask about Section 3612

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

3612.1SCOPE

Provide brick made from burned clay or shale for the following:

(1)Drainage Structures that are part of a sewage, industrial waste, or storm water system
(2)Related Structures such as manholes and catch basins.

3612.2REQUIREMENTS

Use sewer bricks meeting the requirements of ASTM C32, Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale), for the grade shown on the Plans. If the plans do not specify a grade, provide Grade MS for manholes or catch basin construction and Grade SS for other sewer construction .

3612.3SAMPLING AND TESTING

A Compressive Strength and Absorption ......................................................................... ASTM C67 B Freezing and Thawing ................................................................................................... ASTM C67 C Sample Bricks The Engineer will select bricks for testing. Provide test specimens from the manufacturer or seller, at no additional cost to the Department.

Get an email when 3612 changes

Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 982–0 of 1,081. View official source ↗

Ask about this section

Scoped to Minnesota 2025 Standard Specifications for Construction, Section 3612 — Sewer Brick (Clay). Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.