B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 1000 — Materials Details

1027Polymer-Coated Corrugated Metal Culvert Pope and Pipe-Arches

MO · 2026 (Oct) Standard Specifications✓ Full text on BuildSpecBook pages 608–608 Save this section

Ask about Section 1027

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

POLYMER COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES

1027.1 Scope. This specification covers polymer coated corrugated metal culvert pipe and pipe-arches to be

used for the construction of culverts and storm sewers.

1027.2 Basis of Acceptance. Basis of acceptance for pipe and pipe-arches will be in accordance with Secs

1020.2, 1020.5 and the AASHTO specifications cited herein. The basis of acceptance for polymer material will be in accordance with AASHTO M 245. Pipe shall be from an approved qualified plant and will be accepted based on certification, manufacturer QC documentation and results from tests on samples as required by the engineer.

1027.3 Material. Polymer coated corrugated metal pipe and pipe-arches shall be in accordance with Sec 1020

and AASHTO M 245.

Get an email when 1027 changes

Missouri revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Missouri Standard Specifications for Highway Construction, 2026 (Oct) Edition. Pages 608–608 of 874. View official source ↗

Ask about this section

Scoped to Missouri Missouri Standard Specifications for Highway Construction, Section 1027 — Polymer-Coated Corrugated Metal Culvert Pope and Pipe-Arches. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.