B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 700 — Structures

715Vertical Drain at End Bents

MO · 2026 (Oct) Standard Specifications✓ Full text on BuildSpecBook pages 460–460 Save this section

Ask about Section 715

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

715.1 Description. This work shall consist of furnishing and installing a vertical drain system consisting of

drain core, geotextile fabric, perforated and unperforated drain pipe, couplers and a rodent screen as shown on the plans or as directed by the engineer.

715.2 Material. All material shall be in accordance with Division 1000, Material Details, and specifically as

follows: Item Section Geotextile 1011 Geocomposite Drainage Material 1012 Miscellaneous Drainage Material 1013 Corrugated Metallic-Coated Steel Pipe Underdrain 1022

715.3 Construction Requirements.

715.3.1 The contractor shall install the vertical drain system in accordance with the manufacturer's

recommendations.

715.3.2 If the core of the drain is not perforated, modifications shall be made to the core to provide adequate

drainage into the drain pipe as approved by the engineer.

715.3.3 Vertical and horizontal joints shall be constructed to form an uninterrupted drain face after compaction

is completed. All joints shall have an overlap of geotextile to prevent any intrusion of fill material into the drain. Horizontal joints shall be designed to drain downward. Any cracks or openings in the drain adjacent to the fill will be cause for rejection of the drain, and the drain shall be replaced by the contractor, at the contractor’s expense.

715.3.4 The backfill material shall be placed and compacted in accordance with Sec 206. The backfill shall be

placed in such a manner as to prevent damage to the vertical drain system. The backfill material shall be as approved by the engineer.

715.4 Method of Measurement. The work provided herein will not be measured for payment, but will be

considered completely paid for as a system, per each.

715.5 Basis of Payment. The accepted vertical drain system, complete in place, will be paid for at the contract

unit price for vertical drain at end bents, per each. No direct payment will be made for excavation, backfilling, compaction, drain pipe or other material and work

Get an email when 715 changes

Missouri revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Missouri Standard Specifications for Highway Construction, 2026 (Oct) Edition. Pages 460–460 of 874. View official source ↗

Ask about this section

Scoped to Missouri Missouri Standard Specifications for Highway Construction, Section 715 — Vertical Drain at End Bents. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.