836.02 Regulatory Or Warning Sign Assembly
834.05 Method of Measuremen T — Vacant
834.06 Basis of Payment
The Department wi ll pay for each pay item at the contract unit price per the specified pay unit as follows: Pay Item: Pay Unit:
A.TRAFFIC SIGNAL ELECTRICAL CABLE Linear Foot [Meter]
B.SHIELDED LOOP DETECTOR LEAD -IN CABLE Linear Foot [Meter] Include the cost of connectors, splices, and incidentals to the traffic signal system in the contract unit price for Traffic Signal Electrical Cable and Shielded Loop Detector Lead -In Cable.
836.01 Description
This work consists of providing and installing regulatory or warning sign assemblies with flashing beacons.
836.02 Materials
Provide regulatory or warning sign assemblies that consist of a sheet aluminum sign with the message, traffic signal heads, solid -state flashing controller, time clock, sign post, foundation, wiring and conduit as shown on the Plans.
A.Sign Provide the sign material in accordance with Section 850, “Signs.”
B.Solid State Flashing Controller and Time Clock Provide the solid -state flasher controller and time clocks as shown on the Plans and in accordance with Section 827, “Solid -State Flashing Controller.”
C.Flashing Beacons Provide flashing beacons with traffic signal heads and lamps as shown on the Plans and in accordance with Section 831, “Traffic Signal Heads.”
D.Sign Post, Footing, and Mounting Hardware Provide the sign posts and foundations as shown on the Plans and in accordance with Section 850, “Signs.” Provide galvanized, aluminum, or stainless steel mounting hardware.
E.Aluminum Base Provide FHWA -approved cast aluminum bases. RAILROAD -HIGHWAY CROSSBUCK SIGNS 849.04
836.03 Equipment — Vacant
836.04 Construction Methods
Install and connect the regulatory or warning sign assembly to a power supply as shown on the Plans.
836.05 Methods of Measureme Nt — Vacant
836.06 Basis of Payment
The Department will pay for each pay item at the contract unit price pe r the specified pay unit as follows: Pay Item: Pay Unit: REGULATORY OR WARNING SIGN ASSEMBLY Each Include the cost of wiring and connecting the regulatory or warning sign assembly to power in the contract unit price for Regulatory or Warning Sign Assembly . SECTION 849 RAILROAD -HIGHWAY CROSSBUCK SIGNS
849.01 Description
This work consists of providing and erecting railroad -highway crossbuck signs with posts.
849.02 Materials
Provide materials as shown on the Plans. Submit to the Resident Engineer a Type D certification in accordance with Subsection 106.04, “Material Certifications.”
849.03 Equipment — Vacant
849.04 Construction Methods
A.Making Signs Prov ide the signs and posts as shown on the Plans.
B.Setting Signs Set the sign posts in compacted soil holes with the top of the sign set to the elevation as shown on the Plans or as directed by the Resident Engineer. Ensure the sign faces oncoming traffic. Adjust the sign to provide visibility as approved by the Resident Engineer. Backfill the holes with Class A concrete as shown on the Plans. Rod and consolidate the concrete to obtain density. Temporarily support the sign in a plumb position for at leas t 24 hr before removing the supports.
Source: Oklahoma Standard Specifications for Highway Construction, 2019 Edition. Pages 868–868 of 935.