B
HomeLibrariesCopilotSearchProjectsBookmarks
FeedbackHelp Desk
Libraries
Building Codes
Code LibraryIBC — BuildingIRC — ResidentialIFC — FireIPC — PlumbingIMC — MechanicalIFGC — Fuel GasIECC — EnergyNEC — ElectricalModel Codes
Specifications
CSI SpecificationsDOT SpecsTransit SpecsUSACE
Standards
TransportationRailroadFire SafetyAccessibilityStructural
Tools & References
DiagramsAssembliesProductsCalculatorsChecklistsPermits
PricingLog in
General Conditions

00240Temporary Drainage Facilities

OR · 2024 Standard SpecificationsBook pages 280280View official source ↗

00240.00 214 Section 00240 - Temporary Drainage Facilities

Description

00240.00Scope - This Work consists of furnishing, installing, and removing temporary drainage

facilities.

Construction

00240.40Construction - Furnish and install temporary drainage facilities of sufficient capacity and

strength to carry traffic over the facility, and water flow in or under the facility. Determine the actual size, strength and type of facility needed. The sizes of facilities shown on the Plans are minimum only. Submit this determination and its basis to the Engineer for review. Do not install until approved.

Remove temporary drainage facilities when they are no longer needed. The facilities remain the property of the Contractor.

Measurement

00240.80Measurement - No measurement of quantities will be made for Work performed under this

Section.

Payment

00240.90Payment - The accepted quantities of Work performed under this Section will be paid for

at the Contract lump sum amount for the item "Temporary Drainage Facilities". Payment will be payment in full for furnishing, placing, maintaining, and removing temporary drainage facilities, and for furnishing all Equipment , labor, and Incidentals necessary to complete the Work as specified.

Source: Oregon Standard Specifications for Construction, 2024 Edition. Pages 280280 of 1,268.