Division 800 — Section 809
800-32 Section 809 — Right -of-Way Markers and Plat
809.1 Description 1 Furnish and install right-of-way markers and provide the right -of-way plat . 809.2 Materials 1 Provide materials specified in Standard Drawing 809- 105-00. 809.3 Construction 809.3.1 Reinforced Concrete Markers 1 Provide and install reinforced concrete markers according to Standard Drawing 809-105-00 or as directed by the RCE . 809.3.2 Rebar and Cap Markers 1 Provide and install rebar and cap right -of-way markers according to Standard Drawing 809- 105-00 or as directed by the RCE . 809.3.3 Reset Right -of-Way Markers 1 When the Contract provides for existing right -of-way markers to be reset, remove the existing markers and, if necessary, store, protect , and reset the markers at the original locations described in Subsection 809. 3.1 or 809.3.2 as applicable. 809.3.4 Right -of-Way Survey Plat 1 Submit one copy of the right -of-way plat on full sized plan sheets (22 in. × 36 in.) before substantial completion of work. Ensure that the right -of-way plat meet s South Carolina Code of Regulations, §49-460-A, and the latest SCDOT Preconstruction Survey Manual , Section 4.15.02. Record a copy of the plat in the Register of Deeds (ROD) office of the county or counties in which the project resides . 809.4 Measurement 1 The quantity for the pay item Right -of-Way Marker (Reinforced Concrete), Right -of-Way Marker (Rebar & Cap), or Reset Right -of-Way Marker is measured by each (EA) marker installed or reset, complete and accepted. No measureme nt is made for Right -of-Way Plat and is reimbursed as lump sum (LS).