914.01 977 SECTION 914 – NON-METALLIC PIPE
914.01 Non -reinforced Concrete Pipe ................................ ...................... 977
914.02 Reinforced Concrete Pipe (RCP) ................................ ................. 977
914.03 Perforated Concrete Pipe ................................ ............................. 978
914.04 Drain Tile ................................ ................................ ..................... 978
914.05 Clay Pipe ................................ ................................ ...................... 978
914.06 Vitrified Clay Pipe ................................ ................................ ....... 978
914.07 Plastic and Polyethylene Corrugated Tubing ............................... 978
914.08 Precast, Concrete Box Sections ................................ .................... 978
914.09 Polyvinyl Chloride (PVC) Pipe ................................ .................... 979
914.10 High Density Polyethylene (HDPE) Pipe ................................ .... 979
914.11 Steel Reinforced Thermoplastic Ribbed Pipe (SRTRP) ............... 979
914.12 Polypropylene (PP) Pipe ................................ .............................. 979
914.01 Non-reinforced Concr ete Pipe
Provide pipe conforming to ASTM C14 for the specified diameters and strength classes. Manufacture all non -reinforced concrete pipe to meet the Department’s procedure for the Manufacture and Acceptance of Precast Drainage Structures, Noise Wall Panels, and Retaining Wall Panels.
914.02 Reinforced Concrete Pipe (RCP)
Provide pipe conforming to ASTM C76 for the specified diameters and strength classes. Elliptical pipe shall conform to ASTM C507. Arch pipe shall conform to ASTM C506. Precast reinforced concrete end sections shall conform to the cited Specifications to the extent to which they apply. Manufacture all reinforced concrete pipe to meet the Departmental procedures. 914.03 978 914.03 Perforated Concrete Pipe Provide pipe conforming to AASHTO M 175 or to ASTM C444 for the specified dia meters, and, unless otherwise specified, of the standard strength.
914.04 Drain Tile
Provide pipe conforming to AASHTO M 178 for the specified material and diameters, and, unless otherwise specified, of standard quality class. When specified, the pipe spigot shall have integral spacer lugs to provide for an annular opening and self -centering feature.
914.05 Clay Pipe
Provide pipe conforming to ASTM C700 for pipe with full circular cross - section for the specified diameter and strength class. When specified, the bell shall have integral spacer lugs to provide for an annular opening and self - centering feature.
914.06 Vitrified Clay Pipe
Provide pipe conforming to ASTM C700 for the specified diameters and strength classes for circular, unperforated pipe.
914.07 Plastic and Polyethylene Corrugated Tubing
Provide tubing conforming to AASHTO M 252 or ASTM F667 for Heav y Duty Tubing, with the following exception: Tubing having an elongation greater than 5% but less than 10% is acceptable provided the minimum pipe stiffness requirements in Table 1 are met when tested in accordance with ASTM F667, Section 9.7, using a 12-inch base plate.
914.08 Precast, Concrete Box Sections
For culverts, storm drains, and sewers, provide precast reinforced concrete box sections conforming to ASTM C1577. Manufacture all precast concrete box sections in accordance with the Departmental procedures. 914.09 979 914.09 Polyvinyl Chloride (PVC) Pipe Provide PVC pipe from the Department’s Producer List.
914.10 High Density Polyethylene (HDPE) Pipe
Provide HDPE pipe fr om the Department’s Producer List.
914.11 Steel Reinforced Thermoplastic Ribbed Pipe (SRTRP)
Provide SRTRP for pipe from the Department’s Producer List.
914.12 Polypropylene (PP) Pipe
Provide PP pipe for pipe from the Department’s Producer List. 915.01 980 SECTION 915 – METALLIC PIPE
915.01 Ductile Iron or Cast Iron Pipe ................................ ...................... 980
915.02 Corrugated Metal Pipe (CMP) ................................ ..................... 980
915.03 Polymer Pre -coated, Corrugated Steel Pipe, Culverts, and
Underdrains ................................ ................................ .................. 981
915.01 Ductile Iron or Cast Iron Pipe
Provide ductile iron pipe conforming to ASTM A716 for the specified diameters and strength classes. Unless otherwise specified, either smooth, corrugated, or ribbed pipe may be furnished. For pipe diameters i n excess of 48 inches, conform to ANSI Standard for Cast Iron Pit Cast Pipe, or as otherwise specified in the Contract, for the specified diameter and strength class. Provide cast iron drain pipe conforming to ASTM A74. Unless otherwise specified, provi de ductile iron pressure pipe for water lines or sewer construction conforming to the requirements of ASTM A377 for the diameters and working pressures specified.
915.02 Corrugated Metal Pipe (CMP)
A.Corrugated Steel Pipe, Pipe Arches, and Underdrains Provide corrugated steel pipe from the Department’s Producer List, pipe arches, or underdrains, including special sections, such as elbows and flared ends, that conform to AASHTO M 36 , aluminum -coated Type 2 meeting AASHTO M 274. Special secti ons shall be the same thickness as the pipe, arch, or underdrain to which they are joined. Furnish shop - formed elliptical pipe and shop -strutted pipe only where shown on the Plans.
B.Structural Plate Corrugated Steel and Aluminum Structures Corrugated aluminum alloy structural plate for pipe, pipe arches, and arches shall conform to the requirements of AASHTO M 219.
Source: Tennessee Standard Specifications for Road and Bridge Construction, 2021 Edition. Pages 986–988 of 1,072.