B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division II — Materials

204Stone for Masonry, Riprap,Porous Backfill, and Gabions

VA · 2020 Standard Specifications✓ Full text on BuildSpecBook pages 177–177 Save this section

Ask about Section 204

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

SECTION 204—STONE FOR MASONRY, RIPRAP , POROUS BACKFILL, AND GABIONS

204.01 Description

These specifications cover aggregate materials used in the construction of masonry items and stone gabions, to protect ground slopes from erosion or wave action and to facilitate drainage, generally behind a backwall or abutment.

204.02 Detail Requirements

a.Stone for rubble or mortar rubble masonry shall be sound, durable, and free from seams, cracks, and other structural defects and shall be minimum Grade C free from rounded, worn, or weathered surfaces.
b.Stone for riprap and bedding shall be sound, durable, and free from seams, cracks, and other structural defects. Riprap stone and bedding exposed to the wave action of water shall be of igneous or metamorphic origin. Riprap bedding shall be crushed stone, minimum Grade B.
c.Porous backfill shall be aggregate size No. 78 or No. 8, a minimum Grade B. Crushed glass meeting the gradation requirements specified in Section 203.02(d) may be directly substituted for size No. 78 and 8 aggregates.
d.Gabion stone shall be durable and free from seams and cracks. Weathered stone shall not be used. Stone shall weigh between 4 and 30 pounds except that approximately 5 percent of the individual stones may weigh less than 4 or more than 30 pounds. At least 50 percent of the stone shall weigh more than 10 pounds. SECTION 205—CRUSHER RUN AGGREGATE

205.01 Description

These specifications cover crushed aggregate used for backfilling and bedding pipe and box culverts, maintaining traffic, and repairing and constructing all-weather private access pavements.

205.02 Materials

Crusher run aggregate shall be crushed from stone, slag, or gravel and shall contain all of the sizes pro - duced when the original aggregate is reduced through a series of crushers to the maximum size specified. It shall be essentially free from deleterious substances in accordance with Section 203.

a.Crushed hydraulic cement concrete will be permitted for use as crusher run aggregate provided it conforms to the physical requirements of Section 203 and shows no adverse chemical reaction. It shall not be used in a subsurface drainage application in combination with perforated pipe or as a base material where geotextile fabric is to be used. 205.02

Get an email when 204 changes

Virginia revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Road and Bridge Specifications, 2020 Edition. Pages 177–177 of 1,065. View official source ↗

Ask about this section

Scoped to Virginia Road and Bridge Specifications, Section 204 — Stone for Masonry, Riprap,Porous Backfill, and Gabions. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.