713.1: Blank 713.2-METALLIC COATED CORRUGATED STEEL PIPE AND PIPE ARCH: Metallic coated corrugated steel pipe and pipe arch shall conform to the requirements of AASHTO M 36 for Type I and Type II pipe. Special sections, such as elbows, for these conduits shall be of the same gage as the conduit to which they are jointed, and shall conform to the applicable requirements of AASHTO M 36. 713.3-ASPHALT COATED CORRUGATED STEEL PIPE AND PIPE ARCH: Asphalt coated corrugated steel pipe, pipe arches, coupling bands, elbows, and other special sections shall conform to the requirements of AASHTO M 190. Coating and invert paving shall be of the type specified. 713.4 through 713.17: Blank
713.18 Aluminum Alloy Structural Plate for Box Culvert:
Box culvert and the bolts and nuts for connecting plates shall conform to the requirements of AASHTO M 219. 713.19: Blank
713.20 End Sections for Corrugated Steel Pipe and Pipe Arches:
End sections for corrugated iron or steel pipe and pipe arches shall be of the thickness recommended by the manufacturer, and they shal l conform to the applicable requirements of AASHTO M 36 and the details shown on the Plans.
713.21 through 713.23: Blank
713.24 Aluminum Coated Corrugated Steel Pipe and Pipe Arch:
These conduits shall conform to AASHTO M 36 requirements for aluminum coated or aluminum-zinc coated corrugated steel pipe and pipe arch.
Metal Pipe in other states
Get an email when 713 changes
West Virginia revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.