MUTCD E6-2: Pull-Through Signs
The E6-2 sign is covered in Section 2E.27 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Guidance · Recommended (should)Pull-Through signs should be used where the geometrics of a given interchange are such that it is not clear to the road user as to which is the through roadway, or where additional route guidance is desired. Pull-Through signs with down arrows should be used where the alignment of the through lanes is curved and the exit direction is straight ahead, where the number of through lanes is not readily evident, and at…
- Standard · Required (shall)When used, Pull-Through signs shall display the route shield and the cardinal direction for the through route.
Where to read the rest
- Full text: MUTCD Section 2E.27: Pull-Through Signs
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2E.12
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Related signs in Section 2E.27
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.