MUTCD R3-9b: Two-Way Left-Turn-Only Signs and Plaques
The R3-9b sign is covered in Section 2B.32 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Guidance · Recommended (should)A Two-Way Left-Turn-Only (R3-9a or R3-9b) sign (see Figure 2B-6 ) should be used in conjunction with the required pavement markings where a non-reversible lane is reserved for the exclusive use of left-turning vehicles in either direction and is not used for passing, overtaking, or through travel.
- Option · Permitted (may)The post-mounted R3-9b sign may be used as an alternate to or a supplement to the overhead R3-9a sign. The legend BEGIN or END may be used within the border of the main sign itself, or on an R3-9cP or R3-9dP plaque (see Figure 2B-6) mounted immediately above it.
Where to read the rest
- Full text: MUTCD Section 2B.32: Two-Way Left-Turn-Only Signs and Plaques
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2B.03
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Related signs in Section 2B.32
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.