MUTCD W25-2: Traffic Signal Oncoming Extended Green Signs
The W25-2 sign is covered in Section 2C.44 of the Manual on Uniform Traffic Control Devices, 11th Edition. Below are the provisions from that section that describe when the sign is used and how it is placed.
What it means and when it is used
- Standard · Required (shall)At locations where either a W25-1 or a W25-2 sign is required based on the provisions in Section 4F.01, the W25-1 or W25-2 sign (see Figure 2C-10 ) shall be installed near the left-most signal face for the approach. Sect. 2C.45 MERGING, TWO-WAY TRAFFIC, AND NO PASSING WARNING SIGNS AND PLAQUES
Where to read the rest
- Full text: MUTCD Section 2C.44: Traffic Signal Oncoming Extended Green Signs
- Minimum sign sizes by roadway type are in the size section for this chapter: Section 2C.03
- Mounting height, lateral offset and retroreflectivity for any sign: MUTCD sign placement guide
Related signs in Section 2C.44
Source: Manual on Uniform Traffic Control Devices, 11th Edition (Federal Highway Administration, December 2023, public domain). Excerpts are shortened and shown out of context; read the full section before specifying a sign. Your state may still be operating under the 2009 edition or a state supplement. Official manual: mutcd.fhwa.dot.gov.