Norfolk, Virginia Building Permit Cost Calculator
Estimates permit cost in Norfolk from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.
217 jurisdictions with fee schedules on file
Total cost of work, labor and materials
Used by cities that price per square foot
Fences and retaining walls
Electrical permits priced by the ampere
Building Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Residential new construction, including additions that increase the gross area of the existing structure $0.15 x 2,000 = $300.00 | $300.00 |
○Residential alterations and repairs Flat fee $100.00 | $100.00 |
○Residential accessory structures $0.15 x 2,000 = $300.00 | $300.00 |
○Commercial/other new construction (including additions), alterations, and repairs $0.16 x 2,000 = $320.00 | $320.00 |
○Building plan review, new construction, alterations and repairs, 0 to 2,500 square feet Flat fee $35.00 | $35.00 |
○Building plan review, 2,501 to 5,000 square feet Flat fee $75.00 | $75.00 |
○Building plan review, 5,001 square feet to unlimited Flat fee $100.00 | $100.00 |
○Minimum permit fee (building and PME only) Flat fee $50.00 | $50.00 |
○Processing fee added to all permits Flat fee $15.00 | $15.00 |
State surcharge levied on all permits (Code of Virginia Section 36-137) 2 percent | see rule |
Certificate of occupancy or certificate of compliance $50; no charge when issued in connection with a building permit | see rule |
○Demolition, any building or structure Flat fee $50.00 | $50.00 |
○Changes or corrections to the application or approved plans Flat fee $50.00 | $50.00 |
○Administrative fee for work begun without a permit Flat fee $150.00 | $150.00 |
○Re-inspection fee Flat fee $50.00 | $50.00 |
○Appeal to the Board of Building Code Appeals Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Norfolk building permit fees are charged per square foot for residential new construction and accessory structures and as a flat fee for residential alterations and repairs, with commercial and other work at a slightly higher per-square-foot rate. A separate building plan review fee is banded by square footage. A $15 processing fee is added to all permits, a 2 percent state surcharge is levied on all permits under Code of Virginia Section 36-137, and the minimum permit fee for building, plumbing, mechanical and electrical permits is $50.
Source: published fee schedule · Verified 11/6/2026
Deck Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Porches and Decks, uncovered, one story, up to 100 sq. ft. Flat fee $50.00 | $50.00 |
○Porches and Decks, uncovered, one story, 101 to 400 sq. ft. Flat fee $100.00 | $100.00 |
○Porches and Decks, uncovered, one story, 401 sq. ft. and above Flat fee $125.00 | $125.00 |
○Building plan review, new construction, alterations and repairs, 0 to 2,500 square feet Flat fee $35.00 | $35.00 |
○Minimum permit fee (building and PME only) Flat fee $50.00 | $50.00 |
○Processing fee added to all permits Flat fee $15.00 | $15.00 |
State surcharge levied on all permits (Code of Virginia Section 36-137) 2 percent | see rule |
Certificate of occupancy or certificate of compliance $50; no charge when issued in connection with a building permit | see rule |
○Administrative fee for work begun without a permit Flat fee $150.00 | $150.00 |
○Re-inspection fee Flat fee $50.00 | $50.00 |
Refund after foundation inspection completed / after framing inspection completed 75% / 25% | see rule |
How this jurisdiction calculates the fee
Porches and decks are a named category in the Norfolk Building Code Schedule of Fees, charged a flat fee banded by area for uncovered, one-story structures. A deck of any size or height requires zoning approval and a building permit. A building plan review fee applies in addition, a $15 processing fee is added to all permits, a 2 percent state surcharge is levied on all permits under Code of Virginia Section 36-137, and the minimum permit fee for building, plumbing, mechanical and electrical permits is $50.
Source: published fee schedule · Verified 11/5/2026
Electrical Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Electrical Service, Single Phase or Three Phases, 0 - 200 AMP Flat fee $50.00 | $50.00 |
○Electrical Service, 201 - 400 AMP Flat fee $100.00 | $100.00 |
○Electrical Service, 401 - 600 AMP Flat fee $150.00 | $150.00 |
○Each additional 100 AMP up to 1000 AMP Flat fee $25.00 | $25.00 |
Circuit or feeder, 0-20 AMP $3 per circuit | see rule |
Circuit or feeder, 21-40 AMP $4 per circuit | see rule |
Circuit or feeder, 41-60 AMP $6 per circuit | see rule |
Circuit or feeder, 61-120 AMP $15 per circuit | see rule |
○Temporary Electrical Construction Pole Flat fee $50.00 | $50.00 |
How this jurisdiction calculates the fee
Electrical permit fees are set by the ampacity of the electrical service and by a per-circuit charge for each piece of equipment and each circuit or feeder installed, extended, relocated, or repaired; a $15 processing fee and a 2% state surcharge are added to all permits, and the minimum permit fee for building, plumbing, mechanical, and electrical permits is $50.
Source: published fee schedule · Verified 11/6/2026
Fence Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
How this jurisdiction calculates the fee
The fence zoning certificate and its initial inspection are free.
Source: published fee schedule · Verified 8/6/2026
Reroof Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Re-roof and siding, Commercial Flat fee $150.00 | $150.00 |
How this jurisdiction calculates the fee
Residential re-roof and siding work requires no permit; commercial re-roof and siding work is charged a flat fee.
Source: published fee schedule · Verified 11/6/2026
Retaining Wall Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Minimum permit fee, building and PME only (NOT a retaining-wall rate; no retaining-wall permit rate is published) Flat fee $50.00 | $50.00 |
○Processing fee added to all permits Flat fee $15.00 | $15.00 |
State surcharge levied on all permits (Code of Virginia Section 36-137) 2 percent | see rule |
○Administrative fee for work begun without a permit Flat fee $150.00 | $150.00 |
○Changes or corrections to the application or approved plans Flat fee $50.00 | $50.00 |
○Re-inspection fee Flat fee $50.00 | $50.00 |
○Appeal to the Board of Building Code Appeals Flat fee $75.00 | $75.00 |
How this jurisdiction calculates the fee
Norfolk directs retaining wall applicants to start with a building permit, and the Building Permits team may redirect the applicant to a zoning permit instead. Smaller walls are exempt: under the permit exemption language the city publishes from the 2018 Virginia Construction Code Section 108.2, no permit is required for retaining walls supporting less than three feet of unbalanced fill that are not constructed to impound Class I, II or III-A liquids or to support a surcharge other than ordinary unbalanced fill, nor for concrete or masonry walls not exceeding six feet in height above finished grade. NO RETAINING-WALL PERMIT RATE IS PUBLISHED: the Norfolk Building Code Schedule of Fees contains no retaining wall line item in any of its sections. The amounts below are only the charges the schedule applies to every permit; none of them is a retaining-wall permit rate.
Source: published fee schedule · Verified 11/5/2026
Shed Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
How this jurisdiction calculates the fee
The accessory structure zoning certificate and its initial inspection are free.
Source: published fee schedule · Verified 8/6/2026
Water Heater Permit
These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.
○Replacement Water Heater (Mechanical Fee Schedule) Flat fee $20.00 | $20.00 |
○Gas Line (Mechanical Fee Schedule) Flat fee $20.00 | $20.00 |
Plumbing Equipment/Fixtures $10 per fixture/device/system | see rule |
How this jurisdiction calculates the fee
A replacement water heater is charged a flat unit fee under the mechanical fee schedule; a $15 processing fee and a 2% state surcharge are added to all permits, and the minimum permit fee for building, plumbing, mechanical, and electrical permits is $50.
Source: published fee schedule · Verified 11/6/2026
See the full write-up: Norfolk building permit cost
Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.