B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Calculators
All Calculators
Permits
Permit Fee
Egress
Occupant Load & Egress
Structural
Beam SpanConcrete VolumeExcavationDeck Footings
Electrical
Electrical LoadWire Size
Mechanical
HVAC Load
Fire Safety
Fire Resistance
General
Stair Layout
Elsewhere
Code LibraryDiagramsAssembliesChecklistsNeed a custom calculation? →
PricingLog in
Home / Calculators / Building Permit Fee Calculator

Richmond, Virginia Building Permit Cost Calculator

Estimates permit cost in Richmond from the city's own published fee schedule — not a national average. Every figure is computed from a rule quoted verbatim from that document, and rules that cannot be computed honestly are shown as the published text instead of a number.

217 jurisdictions with fee schedules on file

Total cost of work, labor and materials

Used by cities that price per square foot

Fences and retaining walls

Electrical permits priced by the ampere

Building Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential 1 and 2 family, value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
○Commercial, value of work $0 to $2,000
Flat fee $131.00
$131.00
○Commercial, each additional $1,000 of value of work or fraction thereof
Flat fee $8.50
$8.50
How this jurisdiction calculates the fee

Richmond prices a building permit from the value of work, defined as the higher of the contractor estimate or the RS Means price. For 1- and 2-family residential work the fee is $63.00 where the value of work is $0 to $2,000, and $63.00 plus $6.07 per thousand or fraction thereof where it exceeds $2,000; commercial work is $131.00 up to $2,000 and $131.00 plus $8.50 per thousand above that. A 2.0 percent state levy under Code of Virginia section 36-137 is added to the final calculated fee and is remitted to the Virginia Department of Housing and Community Development for the Virginia Building Code Academy, so it is a state charge and not a city one. Neither the published fee schedule nor Appendix A of the City Code states whether the per-thousand charge runs on the entire value of work or only on the amount above $2,000.

Source: published fee schedule · Verified 11/16/2026

Deck Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential 1 and 2 family, value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
How this jurisdiction calculates the fee

There is no separate deck fee line in Richmond; a deck permit is priced from the general value-of-work formula that the Bureau of Permits and Inspections applies to all building permits. Value of work is the higher of the contractor estimate or the RS Means price. For 1- and 2-family residential work the fee is $63.00 where the value of work is $0 to $2,000, and $63.00 plus $6.07 per thousand or fraction thereof where it exceeds $2,000. A 2.0 percent state levy under Code of Virginia section 36-137 is added to the final calculated fee and is remitted to the Virginia Department of Housing and Community Development, so it is a state charge rather than a city one.

Source: published fee schedule · Verified 11/2/2026

Electrical Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential 1 and 2 family, value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
○Commercial, value of work $0 to $2,000
Flat fee $131.00
$131.00
○Commercial, each additional $1,000 of value of work or fraction thereof
Flat fee $8.50
$8.50
How this jurisdiction calculates the fee

Richmond has no separate electrical fee line; one value-of-work formula covers building, mechanical, sign, electrical, security, plumbing, gas-piping, tank, fire alarm, sprinkler, hood and fire suppression, civil and storm water, demolition and elevator permits alike. Value of work is the higher of the contractor estimate or the RS Means price. For 1- and 2-family residential work the fee is $63.00 where the value of work is $0 to $2,000 and $63.00 plus $6.07 per thousand or fraction thereof above that; commercial work is $131.00 up to $2,000 and $131.00 plus $8.50 per thousand above that. A 2.0 percent state levy under Code of Virginia section 36-137 is then added to the calculated fee and is remitted to the state Department of Housing and Community Development rather than kept by the city.

Source: published fee schedule · Verified 11/2/2026

Fence Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Pool barrier fence requiring a permit, residential value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
How this jurisdiction calculates the fee

An ordinary fence carries no city charge in Richmond: it needs no building permit, and Zoning Ordinance section 30-1020 also excuses fences, walls, poles, posts and similar yard accessories that are exempt from a building permit from needing a certificate of zoning compliance. Where a fence does require a building permit because it serves as a swimming pool barrier, there is no fence line item and the permit is priced from the general value-of-work formula: $63.00 for 1- and 2-family residential work valued at $0 to $2,000, and $63.00 plus $6.07 per thousand or fraction thereof above $2,000, with value of work taken as the higher of the contractor estimate or the RS Means price. A 2.0 percent state levy under Code of Virginia section 36-137 is then added to the calculated fee and is remitted to the state, not kept by the city.

Source: published fee schedule · Verified 11/16/2026

Reroof Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential 1 and 2 family, value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
How this jurisdiction calculates the fee

Most re-roofing on one- and two-family dwellings is an ordinary repair that needs no permit in Richmond, so no fee arises. Where a permit is required anyway - for example replacement roofing on a building in a City Old and Historic District, or work in a special flood hazard area - the fee schedule carries no re-roof line item and the permit is priced from the general value-of-work formula. Value of work is the higher of the contractor estimate or the RS Means price; for 1- and 2-family residential work that is $63.00 where the value of work is $0 to $2,000 and $63.00 plus $6.07 per thousand or fraction thereof above that. A 2.0 percent state levy under Code of Virginia section 36-137 is added to the final calculated fee and goes to the state Department of Housing and Community Development, not the city.

Source: published fee schedule · Verified 11/2/2026

Retaining Wall Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Residential 1 and 2 family, value of work $0 to $2,000
Flat fee $63.00
$63.00
○Residential, each additional $1,000 of value of work or fraction thereof
Flat fee $6.07
$6.07
○Commercial, value of work $0 to $2,000
Flat fee $131.00
$131.00
○Commercial, each additional $1,000 of value of work or fraction thereof
Flat fee $8.50
$8.50
How this jurisdiction calculates the fee

A retaining wall that needs a building permit in Richmond has no fee line of its own; it is priced from the general value-of-work formula the Bureau of Permits and Inspections applies to all building permits. Value of work is the higher of the contractor estimate or the RS Means price. For 1- and 2-family residential work the fee is $63.00 where the value of work is $0 to $2,000, and $63.00 plus $6.07 per thousand or fraction thereof where it exceeds $2,000; commercial work is $131.00 up to $2,000 and $131.00 plus $8.50 per thousand above that. A 2.0 percent state levy under Code of Virginia section 36-137 is added to the final calculated fee and is remitted to the Virginia Department of Housing and Community Development rather than retained by the city.

Source: published fee schedule · Verified 11/2/2026

Shed Permit

These lines are alternatives, not a running bill. Pick the one that describes your project and any percentage-based add-ons will be calculated from it.

○Certificate of zoning compliance, building or structure 100 sq ft or less with no building permit required
Flat fee $50.00
$50.00
○Certificate of zoning compliance, building or structure greater than 100 sq ft with no building permit required
Flat fee $100.00
$100.00
How this jurisdiction calculates the fee

A detached one-story shed of 256 square feet or less needs no building permit in Richmond, but Zoning Ordinance section 30-1020 still requires a certificate of zoning compliance for any building or structure three feet or more in height that is exempt from a building permit. The Zoning Administration fee schedule prices that certificate by size: $50.00 for a building or structure of 100 square feet or less for which no building permit is required, and $100.00 for one greater than 100 square feet for which no building permit is required. A shed larger than 256 square feet does need a building permit, and it is then priced from the value-of-work formula in the citywide Permits Fee Schedule with the 2.0 percent state levy under Code of Virginia section 36-137 added on top.

Source: published fee schedule · Verified 11/2/2026

See the full write-up: Richmond building permit cost

Estimate only.Fee schedules change, and building departments set the final valuation and decide which fees apply to your scope. Confirm with the jurisdiction before budgeting. Lines marked “see rule” could not be computed from the published wording and are shown verbatim rather than guessed.