B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Division 600 — Incidental Construction

655Pavement Arrow with Raised Reflectors

GA · 2021 Standard Specifications✓ Full text on BuildSpecBook pages 1226–1228 Save this section

Ask about Section 655

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

655.1 General Description

This work includes installing pavement arrows with raised reflectors. Mark arrows with traffic paint, thermoplastic, or preformed plastic pavement markings according to the proposal and plan details.

655.1.01 Definitions

General Provisions 101 through 150.

655.1.02 Related References

A. Standard Specifications Section 652—Painting Traffic Stripe Section 653—Thermoplastic Traffic Stripe Section 654—Raised Pavement Markers Section 657—Preformed Plastic Pavement Markings Section 868—Bituminous Adhesive for Raised Pavement Markers Section 870—Paint Section 886—Epoxy Resin Adhesives Section 913—Reflectorizing Materials Section 919—Raised Pavement Marker Materials B. Referenced Documents General Provisions 101 through 150.

655.1.03 Submittals

General Provisions 101 through 150.

655.2 Materials

Ensure that materials conform to the following specifications: Material Section Glass Beads (Paint) 652.2 Thermoplastic Traffic Markings 653.2 Glass Spheres (Thermoplastic) 653.2.D Preformed Plastic Pavement Markings 657 Bituminous Adhesive 868 Traffic Line Paint 870.2.02 Epoxy Adhesives, Type I 886.2.01.A Raised Pavement Marker 919

655.2.01 Delivery, Storage, and Handling

General Provisions 101 through 150.

655.3 Construction Requirements

655.3.01 Personnel

General Provisions 101 through 150.

655.3.02 Equipment

General Provisions 101 through 150.

655.3.03 Preparation

General Provisions 101 through 150.

655.3.04 Fabrication

General Provisions 101 through 150.

655.3.05 Construction

Install the raised markers for pavement arrows according to Subsection 654.3.05. A. Painted Arrows Apply painted arrows according to Section 652. B. Thermoplastic Arrows Except as noted below, place thermoplastic according to Section 653. Do not sand blast arrows to be coated with thermoplastic. 1. Apply thermoplastic 125 mils (3.18 mm) thick. 2. Screed or level the thermoplastic. 3. Immediately embed the raised reflector in the molten thermoplastic. C. Preformed Plastic Pavement Markings Apply preformed plastic pavement markings according to Section 657.

655.3.06 Quality Acceptance

General Provisions 101 through 150.

655.3.07 Contractor Warranty and Maintenance

General Provisions 101 through 150.

655.4 Measurement

Each type of arrow is measured by the Unit.

655.4.01 Limits

General Provisions 101 through 150.

655.5 Payment

Each arrow will be paid for per Unit placed. Payment is full compensation for furnishing materials, cleaning, and installing the completed arrow with raised reflectors. Payment will be made under: Item No. 655 Pavement arrow (painted) with raised reflectors Per each Item No. 655 Pavement arrow (thermoplastic) with raised reflectors Per each Item No. 655 Pavement arrow (preformed plastic) with raised reflectors Per each

655.5.01 Adjustments

General Provisions 101 through 150.

Get an email when 655 changes

Georgia revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for Construction of Transportation Systems, 2021 Edition. Pages 1226–1228 of 2,050. View official source ↗

Ask about this section

Scoped to Georgia 2021 Standard Specifications, Section 655 — Pavement Arrow with Raised Reflectors. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.