Overhead Sign Structures Art. 733.04 SECTION 731. BASE FOR TELESCOPING STEEL SIGN SUPPORT
731.01 Description. This work shall consist of furnishing and installing a
base for a telescoping steel sign support.
731.02 Materials. Materials shall be according to the following.
Item Article/Section
a.Base for Telescoping Sign Support ................................................... 1093.02
b.Hardware (Note 1) ......................................................................... 1006.29(d) Note 1. The anchor bolts, nuts, and washers shall be stainless steel.
731.03 Method of Measurement. Each base will be measured for payment
as an individual unit complete in place.
731.04 Basis of Payment. This work will be paid for at the contract unit price
per each for BASE FOR TELESCOPING STEEL SIGN SUPPORT. SECTION 732. RESERVED SECTION 733. OVERHEAD SIGN STRUCTURES
733.01 Description. This work shall consist of fabricating, furnishing, and
erecting overhead sign structures, including supports, on previously prepared foundations.
733.02 Materials. Materials shall be according to the following.
Item Article/Section
a.High Strength Steel Bolts, Nuts, and Washers .............................. 1006.08(b)
b.Fabric Bearing Pads ............................................................................... 1082
c.Overhead Sign Structures ...................................................................... 1094 CONSTRUCTION REQUIREMENTS
733.03 Drawings. Two sets of shop fabrication drawings for each overhead
sign structure shall be submitted to the Engineer for approval according to
Article 505 — 03.
733.04 Fabrication. Structural steel shall be fabricated and inspected
according to the applicable portions of Articles 505.04 and 505.05. Aluminum shall be fabricated according to Article 1094.05 and the following. Thermal cutting will not be permitted. Holes and cuts in extruded alloys shall be made by mechanical methods (drilled, sawed, machined). All holes in castings or forgings shall be drilled from solid or formed and reamed for final fit. Damage to
Referenced in this section
Get an email when 731 changes
Illinois revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.
Source: Illinois Standard Specifications for Road and Bridge Construction, 2022 Edition. Pages 662–662 of 1,217. View official source ↗