B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in
Sections 1000s

1001Portland Cement and Cementitious Materials

LA · 2016 Standard Specifications✓ Full text on BuildSpecBook pages 994–995 Save this section

Ask about Section 1001

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

1001.01 PORTLAND CEMENT. Use portland cement from the

Approved Materials List and comply with AASHTO M 85. Alkali content calculated as sodium oxide equivalent shall not exceed 0.60 percent by weight.

1001.02 BLENDED HYDRAULIC CEMENT. Use blended hydraulic

cement Type IP, Type IS, or Type IL from the Approved Materials List and comply with AASHTO M 240. The alkali content of blended hydraulic cement calculated as sodium oxide equivalent shall not exceed 0.60 percent by weight. Type IP may contain up to 30 percent by weight of fly ash or up to 30 percent by weight of bottom ash, provided that the bottom ash is interground with the cement clinker. Fly ash and bottom ash shall comply with AASHTO M 295, Class C or F. Type IS cement may contain up to 50 percent by weight of ground granulated blast-furnace slag. Grade 100 and Grade 120 ground granulated blast-furnace slag (slag cement) shall comply with AASHTO M 302. Type IL portland limestone cement shall not be treated as blended cement for purposes of cement material substitution with fly ash and slag.

1001.03 MASONRY CEMENT AND MORTAR CEMENT. Comply

with ASTM C91 for masonry cement. Comply with ASTM C1329 for mortar cement. Mix mortar cement in accordance with ASTM C270 or use pre-blended dry mortar cement complying with ASTM C1714 and mix according to the manufacturers recommendations.

1001.04 FLY ASH AND NATURAL POZZOLANS. Use fly ash from

the Approved Materials List. Comply with AASHTO M 295 for Class C and Class F. Comply with ASTM C618 for Class N. Alkali content calculated in accordance with DOTD TR 531 shall not exceed 2.5 percent by weight. Fly ash and natural pozzolans with alkali contents greater than 1.5 percent may only be used with innocuous (non-reactive) aggregates.

1001.05 Ground Granulated Blast-Furnace Slag

(SLAG CEMENT). Use Grade 100 or Grade 120 ground granulated blast-furnace slag from the Approved Materials List and comply with AASHTO M 302.

1001.06 MICROSILICA (SILICA FUME). Use microsilica (silica

fume) from the Approved Materials List and comply with AASHTO M 307.

Get an email when 1001 changes

Louisiana revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Standard Specifications for Roads and Bridges, 2016 Edition. Pages 994–995 of 1,145. View official source ↗

Ask about this section

Scoped to Louisiana Standard Specifications for Roads & Bridges, Section 1001 — Portland Cement and Cementitious Materials. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.