1025Corrugated Aluminum Alloy Pipe Underdrains

MO · 2026 (Oct) Standard Specifications✓ Full text on BuildSpecBook pages 603–603 Save this section

Ask about Section 1025

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

CORRUGATED ALUMINUM ALLOY PIPE UNDERDRAINS

1025.1 Scope. This specification covers corrugated aluminum alloy pipe underdrains.

1025.2 Basis of Acceptance. The basis of acceptance will be in accordance with Secs 1020.2 and 1020.5 as

specified herein.

1025.3 Material. Pipe for corrugated aluminum alloy pipe underdrains shall be in accordance with AASHTO M

196, Type III, with the following modifications.

1025.3.1 Pipe 6 inches in diameter shall be fabricated of metal no less than 0.048 inch, 18 gage, specified

thickness. Pipe with diameters 8 to 21 inches, inclusive, shall be fabricated of metal no less than 0.060 inch, 16 gage, specified thickness.

1025.3.2 Coupling bands shall be of the same aluminum alloy as the pipe.

Get an email when 1025 changes

Missouri revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Missouri Standard Specifications for Highway Construction, 2026 (Oct) Edition. Pages 603–603 of 874. View official source ↗

← Previous

1024 Corrugated Aluminum Alloy Culvert Pipe and Corrugated Aluminum Alloy Structural Plate

1026 Reinforced Concrete Culvert Pipe

Ask about this section

Scoped to Missouri Missouri Standard Specifications for Highway Construction, Section 1025 — Corrugated Aluminum Alloy Pipe Underdrains. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.