1050 Page 5961050 STEEL SHEETING
1050.1SCOPE
This specification covers the fabrication of galvanized steel sheet products.
1050.2REQUIREMENTS
The galvanized steel used in fabricated metal products will conform to ASTM A929. The sheeting will be true, straight, and uniform in section. The sheeting will be galvanized at a rate of 2 ounces per square foot total for both sides. The steel sheeting for fabricated lightweight sheet piling and other items in which interlock is specified will consist of corrugated or flat steel sheets which, when properly driven or installed, will interlock with adjacent sheets for the full length of the sheet. The interlock will be formed by bending the metal 180 degrees, leaving an opening to allow free slippage of adjoining sheets. The specified metal products will be fabricated to the strength, shape, and dimensions shown in the plans and to avoid cracking or breaking the spelter coating on the galvanized sheets.