B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Code LibraryDiagramsAssembliesProductsCalculatorsChecklistsCSI MasterFormat SpecificationsPermitsAddress ReportDOT SpecsModel CodesTransportationRailroadFire SafetyAccessibilityStructuralTransit SpecsUSACE
Other Jurisdictions
Transportation
MUTCDFHWA FP-14
Accessibility
ADA StandardsPROWAG
PricingLog in

VirginiaRichmond

Re-roof permit checklist — Richmond, Virginia

Assembled from Richmond’s own published permit rules. Every line below is quoted from a city document and linked to it. Nothing here is generated, estimated, or inferred from another jurisdiction.

Do you need a permit?

Richmond does not require a permit for a re-roof.

When a permit is not required

Replacement of roof covering or siding on one- and two-family dwellings, townhouses and similar residential occupancies is treated as an ordinary repair and does not require a building permit where the nominal design wind speed is not greater than 100 miles per hour. Replacement of 100 square feet or less of roof covering is exempt in all occupancies and all wind zones, and replacement of 256 square feet or less of roof decking is exempt in residential occupancies unless that decking was originally required to be fire-retardant-treated or otherwise protected. Replacement siding, roofing and windows on a building in a City Old and Historic District are not exempt and require a permit, and a permit may also be required for otherwise exempt work located in a special flood hazard area.

Loading the full checklist…

Sources

Other permits Richmond publishes rules for

Listed because the city publishes a separate rule for each type — not because this project necessarily triggers one. Whether it does depends on your scope of work.

All Richmond permit requirementsRichmond permit costsApply with the city ↗

BuildSpec is a reference, not the authority having jurisdiction. Confirm requirements with Richmond before you build.

Re-roof permit checklist — Richmond, Virginia | BuildSpec