3752Membrane Curing/Sealing Compound for Colored Concrete

MN · 2025 Standard Specifications✓ Full text on BuildSpecBook pages 1000–0 Save this section

Ask about Section 3752

Get a cited answer from the section text. Click the citation to check it.

One cited answer a day is free. Start a 14-day trial for unlimited, no card required.

3752.1SCOPE

Provide a curing/sealing compound for spray application on Portland cement colored concrete surfaces.

3752.2REQUIREMENTS

Provide membrane curing/sealing compound meeting the following requirements:

(1)Meets the requirements of ASTM C1315, Liquid Membrane-Forming Compounds Having

Special Properties for Curing and Sealing Concrete.

(2)Type I, Class A, with an Acrylate Polymer or Acrylate Copolymer resin.

(3)Meets the requirements of the Department’s Curing/Sealing Compounds for Colored

Concrete Approval Program, as listed in the APL.

The Contractor may use this membrane curing/sealing compound in other applications as approved by the Engineer or as shown in the Special Provisions.

3752.3SAMPLING AND TESTING

Provide a statement of compliance meeting the requirements of ASTM C1315, Liquid Membrane- Forming Compounds Having Special Properties for Curing and Sealing Concrete, Type I, Class A, with an Acrylate Polymer or Acrylate Copolymer resin.

Get an email when 3752 changes

Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.

Source: Minnesota Standard Specifications for Construction, 2025 Edition. Pages 1000–0 of 1,081. View official source ↗

← Previous

3751 Burlap Curing Blankets

3753 Type 1-D Membrane Curing Compound

Ask about this section

Scoped to Minnesota 2025 Standard Specifications for Construction, Section 3752 — Membrane Curing/Sealing Compound for Colored Concrete. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.