3753.1SCOPE
Provide clear or translucent liquid membrane forming curing compounds with a Type 1-D fugitive dye for spray application on Portland cement colored or stamped concrete surfaces, where a finished white surface would mask the decorative finished concrete surface when exposed to the air.
3753.2REQUIREMENTS
A General Provide membrane curing compound meeting the following requirements:
most current approved lots and batches with product expiration dates are available on the APL
Program, as listed in the APL, including pre-testing of Materials by the manufacturer
Forming Compounds for Curing Concrete, Type 1-D Curing Compound
manufacture date The Contractor may use Type 1-D curing compound in other concrete applications as approved by the Engineer or as shown on the Special Provisions. Use of any other Type 1 curing compound is at the discretion of the Engineer, in conjunction with the Concrete Engineer.
3753.3SAMPLING AND TESTING
Provide samples for testing meeting the requirements of the Schedule of Materials Control . Test the Material at an application rate of 200 square feet per gallon.
Get an email when 3753 changes
Minnesota revises spec sections through supplementals and new editions. We check this one every week and email you the day it changes. Free, no account.