Home / DOT Specifications / Utah / Referenced Standards / PTI/ASBI M50.3 Specification for Multistrand and Grouted Post-Tensioning

📚Referenced Standards

PTI/ASBI M50.3 Specification for Multistrand and Grouted Post-Tensioning

WebPost-Tensioning Institute / ASBI

Specification for materials, systems, installation and quality control of multistrand and grouted post-tensioning in bridges and structures.

M50.3-19 with 2024 Addendum 1; supersedes M50.3-12.

Open canonical source↗← Back to Utah

Document Viewer

📚

Published by Post-Tensioning Institute / ASBI

Utah Department of Transportation (UDOT) incorporates this document by reference. It is not an agency publication and BuildSpec does not republish it; open the publisher's page for the current edition.

Open at publisher↗

Other Referenced Standards

← Previous

PCI Bridge Design Manual (MNL-133)

PTI M55.1 Specification for Grouting of Post-Tensioned Structures

Ask about this section

Scoped to Utah PTI/ASBI M50.3 Specification for Multistrand and Grouted Post-Tensioning. Every answer cites the section it came from, with a verification date — don’t trust a percentage, click the citation.