B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in

Utah › Washington

Fence permit checklist — Washington, Utah

Assembled from Washington’s own published permit rules. Every line below is quoted from a city document and linked to it. Nothing here is generated, estimated, or inferred from another jurisdiction.

Do you need a permit?

Washington requires a permit for a fence.

When a permit is not required

City Code 9-14-12 sets fence, wall and hedge heights and requires a building permit only above a height threshold: the code allows fences, walls and hedges to the permitted building height when located within the buildable area, provided a building permit is obtained for any structure over six feet in height. In rear and interior side yards the height may not exceed six feet, and within the first ten feet from the street property line in a front yard the height may not exceed three feet. Individual shrubs are not a hedge unless spaced less than five feet apart, and where the grade differs on either side of a common boundary the structure may reach the maximum height permitted on either side of the line. History: Ord. 89-5, 3-1-1989; Ord. 97-22, 7-23-1997.

What Washington publishes for this permit

  • 1 process step from application to final
  • 1 published fee line from the city's fee schedule
  • Checked against Washington's documents on November 9, 2026

Loading the full checklist…

Sources

Other permits Washington publishes rules for

Listed because the city publishes a separate rule for each type — not because this project necessarily triggers one. Whether it does depends on your scope of work.

All Washington permit requirementsWashington permit costsApply with the city ↗

BuildSpec is a reference, not the authority having jurisdiction. Confirm requirements with Washington before you build.

Fence permit checklist — Washington, Utah | BuildSpec