B
HomeLibrariesCode AISearchProjectsBookmarksAddress
FeedbackHelp Desk
Libraries
Estimate & calculate
CalculatorsChecklists
PricingLog in

Utah › Washington

Retaining wall permit checklist — Washington, Utah

Assembled from Washington’s own published permit rules. Every line below is quoted from a city document and linked to it. Nothing here is generated, estimated, or inferred from another jurisdiction.

Do you need a permit?

Washington requires a permit for a retaining wall.

When a permit is not required

Washington City's published retaining wall provision is City Code 10-5-9 (Title 10 Subdivision Regulations, Chapter 5 Improvements Required), which governs rockery walls. Rockery walls three feet high and greater, measured from the ground surface to the top of the uppermost rock layer, require a permit issued by the Washington City Public Works Department before construction, unless the wall was included and approved on the engineered construction drawings for the subdivision. An individual rockery wall may not exceed eight feet, or as limited by the international building code, whichever is most restrictive. The city website does not publish a separate Building Department retaining wall handout, so this is the only official retaining wall threshold located.

What Washington publishes for this permit

  • 7 submittal documents to include with the application
  • 1 process step from application to final
  • 1 published fee line from the city's fee schedule
  • Checked against Washington's documents on November 5, 2026

Loading the full checklist…

Sources

Other permits Washington publishes rules for

Listed because the city publishes a separate rule for each type — not because this project necessarily triggers one. Whether it does depends on your scope of work.

All Washington permit requirementsWashington permit costsApply with the city ↗

BuildSpec is a reference, not the authority having jurisdiction. Confirm requirements with Washington before you build.

Retaining wall permit checklist — Washington, Utah | BuildSpec